Feature :
1 . Two powerful high-gain external antennas give wider coverage and better performance
2 . Wireless function, make your wireless coverage larger
3 . Compatible with other brands router. Manage your network settings easily with the Xiaomi Mi WiFi APP
4 . This amplifier will upgrade automatically without any setting. Plug and play, easy to use

Detail :
Size : 80×54×70 mm
CPU : MT7628K 580 MHz
ROM : 2MB
RAM : 8MB
Antenna Type : 2 external antennas
Wireless Standards : IEEE 802.11b/g/n
Singal Rate : 2.4 GHz, up to 300 Mbps
Wireless Security : WPA-PSK/ WPA2-PSK encryption
Power Supply : 100-240 V/0.35 A
Operating temperature : 0-40°C
Operating humidity : 10%-90%RH (non-condensing)
Storage temperature : -40-70°C
Storage humidity : 5%-90%RH (non-condensing)
Power consumption : 3.57W

FAQ :
1 . Why can't  find an amplifier in my device?
You need to choose mainland China, then find this device, and then connect, because the amplifier is in Chiness version
2 . What do the different colors of the indicator light mean?
a . The blue light is always on : the amplifier is running normally, and the WiFi pairing is successful.
b . The yellow light is always on : the amplifier is starting up, the process is very short, about 10 seconds.
c . Blinking blue : Waiting for pairing, pairing, or pairing failed.The pairing failed. The original network's WiFi password may be changed or it may be far from the original network.
d . Steady red light : The boot failed, please re-plug and try to repair.
3 . Why The amplifier is always flashing orange, then the blue light is flashing?
a . The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed.
b . Please upgrade your router to the latest development or stable version (2.0 or above)
c . Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair
4 . Why the paired amplifier appears blue flashing
Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing
5 . How to customize the network name and password of the amplifier?
Not supported yet.
6 . How to upgrade the firmware?
a . When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade;
b . In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client.
7 . Why can't the amplifier get the signal from the router?
Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .

Include :
1*WiFi Repeater