PDT-PEX-7004-MP-I
1 Port 10/100/1000 PoE+ to 4 Port 10/100/1000 PoE+ Extender
The PDT-PEX-7004-MP-I is a hardened 4 Channel Gigabit Ethernet PoE Extender which facilitates connectivity for IEEE 802.3 af/at devices, such as cameras, access points, and other PoE devices, up to a range of 100m from the device, and in locations where there is no power source available.
The device is powered from a remote power source with PoE+ capability, and this can be extended, in a daisy Access Ports which are IEEE802.3af/at compatible (max total PoE load 25W) and has one 10/100/1000 RJ45 Port which receives the data and power feed from the host device.
The device is designed for use in harsh industrial environments, and incorporating a rugged aluminium housing, it can be operated across a wide temperature range (-40°C to +80°C) making it suitable for most conditions.
The device is designed for use in harsh industrial environments, and incorporating a rugged aluminium housing, it can be operated across a wide temperature range (-40°C to +80°C) making it suitable for most conditions.
All documentation including Datasheet, Manual, and Declaration of Conformity is available to download on the main website.
Features:
The following items are included in the shipping carton:
ETHERNET | |
Standards | IEEE 802.3 Ethernet |
IEEE 802.3u Fast Ethernet | |
IEEE 802.3ab Gigabit Ethernet | |
IEEE 802.3af Power over Ethernet | |
IEEE 802.3at Power over Ethernet Plus | |
Forwarding and Filtering Rate | 14,880pps (10Mbps) |
148,800pps (100Mbps) | |
1,488,000pps (1000Mbps) | |
Packet Buffer | 1Mbits |
Packet Length | 10KB |
Switch Fabric | 10Gbps non-blocking |
MAC Address Table | 8K |
Exchange Property | Backplane Bandwidth 20Gbps |
Packet Forwarding Rate 14.88Mbps | |
INTERFACE | |
Power & Data | 1 x RJ45 Power & Data Input (PoE+) 4 x RJ45 Power & Data Output (PoE+) |
POE | |
Standard | IEEE 802.3af/ IEEE 802.3at |
Port | RJ45 |
Power Supply Type | Mid-Span & End-Span |
Pin Assignment | 1/2 (+) 3/6 (-) 4/5 (+) 7/8 (-) |
Power Budget | Up to 25W Total <100m - 20W Total 100~200m |
Channel Power | Max 25W per Single Channel |
ENVIRONMENTAL | |
Operating Temperature | -40°C to +80°C |
Storage Temperature | -40°C to +85°C |
Relative Humidity | 5% - 95% non-condensing |
MTBF | 200,000 hours |
ELECTRICAL | |
Operating Voltage | +48~57VDC via PoE+ (IEEE 802.3at) |
Power Consumption | 5W without PoE |
Short-Circuit Protection | Auto-Reset |
Reverse Polarity | Protected |
MECHANICAL | |
Dimensions | 95mm x 68mm x 29mm |
Weight | 250g |
Casing | Aluminium |
Mounting | DIN Rail & Wall Mount |
INDICATORS | |
PWR | Power Status |
L/A | Link Activity |
PoE | PoE Power Output Status |
NC | Not Used |
CERTIFICATION | |
Electrical Safety | EN 62368-1:2020+A11:2020 |
Emissions | EN 55032:2015+A1:2020 |
Radiated Immunity | EN 55035:2017+A1:2020 |
Harmonic Emissions | EN 61000-3-2:2014 |
Fluctuations and Flicker | EN 61000-3-3:2013 |
Electro-Static Discharge | 6KV 1a Constant Discharge Level 3 |
8KV 1b Air Discharge Level 3 | |
EN 61000-4-2:2009 | |
Electromagnetic Field Immunity | EN 61000-4-3:2010 |
Electrical Fast-Transients | EN 61000-4-4:2012 |
Surge | EN 61000-4-5:2014+A1:2017 |
Conducted Immunity | EN 61000-4-6:2014 |
Power Frequency Magnetic Field | EN 61000-4-8:2010 |
RoHS | IEC 63000:2018 |