Adjustable Voltage Current Power Module for LED Driver and Battery Charger
DESCRIPTION


Feature:
*Onboard voltage, current, and power meters, you can easily use this module without a multimeter, which is simpler and more intuitive.
*It has two modes: constant voltage and constant current, and there is an indicator light to indicate which mode the module is currently in;
*When used as a lithium battery charger, the float voltage and charging current can be set, and there is an indicator light to indicate whether it is charging or fully charged;
*With current limiting protection function, the module will not be burned out even if the output is short-circuited.
*Onboard voltage and ammeter can be self-calibrated to avoid inaccurate voltmeter readings

Specification:
Part name:Step-down power module with shell
Model: XY-HX
Material: plastic
Color: As shown in the picture
Input voltage: 5-36V (Note! The digital display will be normal only when the input voltage is greater than 6.5V. If your input is 5V, please use a voltmeter to measure the output terminal to adjust the output voltage)
Output voltage: 1.25-32V continuously adjustable
Output current: adjustable, maximum 5A (recommended to use within 4.5A)
Output power: maximum 75W (recommended to be used within 50W, please reduce the power when using a large voltage difference)
Working temperature: -40~+85 degrees
Working frequency: 180KHz
Conversion efficiency: up to 96%
Short circuit protection: Yes
Over-temperature protection: Yes
Input reverse polarity protection: None
Installation method: 4 3mm screws
Wiring method: wiring terminals or welding terminals, V-IN is input, V-OUT is output
Module size: 68.2mm long, 38.8mm wide, 15mm high
Weight: 73g

Package Contents:
1*Step-down power module with shell


Notes:
Some customers reported that the output voltage of the module cannot be adjusted. When you encounter this problem, please rotate the CV potentiometer counterclockwise for more than 20 turns, and then use the module to adjust the voltage normally. Because when the module leaves the factory , the default output voltage is around 17V.

POLICES

 

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

 

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

 

It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

 


Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.