Pneumatic Bottle Filler Automatic Liquid Filling Machine Viscous Liquid Filler
Liquid/Water Filling/Bottling Automatic Quantitative Encapsulation Machine
Product Parameters:
Model: Lh-852
Voltage: Ac110v
Rated Power: 210w
Filling Range: 0.01-999.99
Unit of Measurement: S/G/Kg/Ml/L
Minimum Filling: 50g
Waiting Time: 0.01-999.99s
Counting Range: 1-99999
Filling Speed: 17l/Min (Water)
Filling Error: ±1%
Vacuum: 2m
Nozzle: Outer Diameter 20mm
Discharge Tube: Outer Diameter 25mm/Length 0.6m
Feeding Tube: Outer Diameter 25mm/Length 2.0m
Liquid Temperature: ≤60
Host Specification: 360*300*156mm
Machine Weight: 8.5kg
Viscous Liquid: Applicable
Ordinary Liquid Filling: 17l/Min
Viscous Liquid Filling: About 7l/Min
Model: Lh-852
Voltage: Ac110v
Rated Power: 210w
Filling Range: 0.01-999.99
Unit of Measurement: S/G/Kg/Ml/L
Minimum Filling: 50g
Waiting Time: 0.01-999.99s
Counting Range: 1-99999
Filling Speed: 17l/Min (Water)
Filling Error: ±1%
Vacuum: 2m
Nozzle: Outer Diameter 20mm
Discharge Tube: Outer Diameter 25mm/Length 0.6m
Feeding Tube: Outer Diameter 25mm/Length 2.0m
Liquid Temperature: ≤60
Host Specification: 360*300*156mm
Machine Weight: 8.5kg
Viscous Liquid: Applicable
Ordinary Liquid Filling: 17l/Min
Viscous Liquid Filling: About 7l/Min
Highlights:
This Product Uses a Microcomputer to Control the Pump's Working Time, Speed and Other Factors to Achieve a Liquid Filling Device with Accurate Output and Small Repeat Error.
the Product Uses a Self-priming Pump, Which Can Run Continuously for a Long Time with Low Noise. It Is Suitable for the Filling of Ordinary Liquid and Viscous Liquid.
with Oil Resistance, Heat Resistance, Weak Acid Resistance, Weak Alkali Resistance, Corrosion Resistance and Other Characteristics, It Can Be Widely Used in Food, Beverage, Pharmaceutical, Chemical, Oil
Description
Digital Display Function Is Easy to Operate and Stable Performance
1. High Filling Accuracy: Deviation Is less than 1%, and with Deviation Correction Function
2. High Filling Speed: 17 Liters/Minute (Water), the Speed Can Be Adjusted 1-99%
3. High Degree of Intelligence: There Are Automatic and Inching Mode, with Filling Parameter Learning Function
4. Various Quantitative Units: Time: S Weight: G, Kg Volume: Ml, L
5. Single-point Calibration: Calibrate and Replace the Weight of the Peer Product As Much As Possible. Re-calibration Is Required for the Filling Volume. Once Our Products Are Calibrated, All Weights Can Be Accurately Filled!
6. Full Numeric Keyboard: Modify the Parameters and Input the Numbers Directly, Without Pressing the plus and Minus Keys to Slowly Add or Subtract
7. Chinese and English Bilingual Menu
Panel Introduction
Setting/Menu: Short Press This Key to Enter the Setting Interface to Modify the Filling Parameters, Long Press This Key for 3 Seconds to Enter the Menu
Run/Stop: Press This Key to Start Filling When Filling Is Stopped, Press This Key to Stop When Filling
Jog/Auto: Press This Key to Switch Working Mode
Jog: Press Once to Fill Once
Automatic: After Pressing Once, the Filling Machine Finishes the Countdown Waiting Time and Then Fills the Second Time, and Continues to Cycle Until the Run Key Is Pressed Again to Stop
Count Clear: Filling Counter Data Reset to Zero
Esc: Exit
Ent: Confirm, Press This Key on the Working Interface to Directly Select the Program Number
↑↓←→: Move Cursor When Modifying Parameters
0-9 Key: Input Digital Indicator: Light Indicates the Current Working Status of the Device
Packing List:
Main Unit*1, Bracket*1, Power Cord*1, Foot Switch*1, Hexagon Wrench*1, Instruction Manual*1
Digital Display Function Is Easy to Operate and Stable Performance
1. High Filling Accuracy: Deviation Is less than 1%, and with Deviation Correction Function
2. High Filling Speed: 17 Liters/Minute (Water), the Speed Can Be Adjusted 1-99%
3. High Degree of Intelligence: There Are Automatic and Inching Mode, with Filling Parameter Learning Function
4. Various Quantitative Units: Time: S Weight: G, Kg Volume: Ml, L
5. Single-point Calibration: Calibrate and Replace the Weight of the Peer Product As Much As Possible. Re-calibration Is Required for the Filling Volume. Once Our Products Are Calibrated, All Weights Can Be Accurately Filled!
6. Full Numeric Keyboard: Modify the Parameters and Input the Numbers Directly, Without Pressing the plus and Minus Keys to Slowly Add or Subtract
7. Chinese and English Bilingual Menu
Panel Introduction
Setting/Menu: Short Press This Key to Enter the Setting Interface to Modify the Filling Parameters, Long Press This Key for 3 Seconds to Enter the Menu
Run/Stop: Press This Key to Start Filling When Filling Is Stopped, Press This Key to Stop When Filling
Jog/Auto: Press This Key to Switch Working Mode
Jog: Press Once to Fill Once
Automatic: After Pressing Once, the Filling Machine Finishes the Countdown Waiting Time and Then Fills the Second Time, and Continues to Cycle Until the Run Key Is Pressed Again to Stop
Count Clear: Filling Counter Data Reset to Zero
Esc: Exit
Ent: Confirm, Press This Key on the Working Interface to Directly Select the Program Number
↑↓←→: Move Cursor When Modifying Parameters
0-9 Key: Input Digital Indicator: Light Indicates the Current Working Status of the Device
Packing List:
Main Unit*1, Bracket*1, Power Cord*1, Foot Switch*1, Hexagon Wrench*1, Instruction Manual*1
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On May 10, 2024 at 03:29:20 PDT, seller added the following information: