features:

1: Portable spot welding machine with quick-release welding pen.

2: Small and portable size design, easy to carry.

3: Adopt integrated gold-plated soldering pen terminal, with good conductivity and low contact resistance.

4: Thickened pure copper strip, imported MOS tube, energy saving, longer service life.

5: Built-in high-rate battery, excellent charge and discharge performance, more stable.

Please note that:

This product is not equipped with a charger. You can use a mobile phone charger to charge this product, so you can use this product normally regardless of whether you use 110v voltage or 220V voltage in your country.

Specifications：

Host size: 103 * 82 * 29mm

Welding pen length: about 320mm

Welding pen wire: AWG10

Battery capacity: 5500mAh

Maximum discharge current: MAX650A

Whether punching and welding are supported: Yes

USB output: 5V MAX2.4A

Full power welding times: about 1000 points

instructions:

*Please pay attention to fully charge the battery before use*

1. Turn on/off - press and hold the button for 3 seconds, and release the button after hearing the sound of turning on, that is, turn on/off.

2. Press the button briefly. If the bell rings, this is the shift position. Press once to increase the  gear. For 1-9 cycles, the 9th gear has the strongest welding force.

3. Welding operation - starting from level 1, once the item is detected, the equipment will start welding after 0.5 seconds. The power adjustment can be adjusted to adapt to different welding work. If the high level enters the current protection mode and restarts, a usb input can be connected;

4. utomatic shutdown - After 15 minutes without any activity, the device will automatically shut down.

5. USB output - USB output will be automatically activated after insertion. Once the output current is less than 50mAh, the machine will automatically cut off the power output. Short press to restore power output.

6. Error  - if the equipment fails, the buzzer will keep beeping after power on;

7. Firmware upgrade - keep the upgrade port and upgrade to the latest firmware

Package includes:

A: 1 x spot welder+2 x spot welding pen+1 x nickel foil (0.12 * 8mm * 2m)+1 x TYPE-C wire

B: 2 x spot welding pen

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.