The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency shift detection and other applications.

 

Features:

  • The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive.
  • There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost.
  • The mixer is designed as a single power supply, RF, IF and LO port with DC isolation capacitor, easy to use.
  • The operating frequency of the RF and LO inputs can be as high as 500MHz.
  • IF output is single ended voltage output.
  • With 250 MHz output bandwidth.
  • A single resistor connected between pins OUT and FB is used to set the gain.
  • The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation.
  • When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz.
  • Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831.

 

Specifications:

Model: AD831

RF Input: 0.1-500MHz

RF Input: +10dBm (1dB compression point)

Local Oscillator Input: 0.1-500MHz

Local Oscillator Input: -10dBm

IF Output: 0.1-200MHz

Power Supply Voltage:±5V Dual power supply

Size: Approx. 7*5.3cm/2.8*2.1inch

Weight: Approx. 12g / 0.4oz

 

Package List:

1 x Active Mixer Module

  

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. 

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

DataCaciques