Curtis 24/36V 275A (0-5K) PMC 1204-027
PRODUCT DESCRIPTION
The electronic motor speed controller, Curtis Controller Model 1204-027, operates at high frequency, making them a noiseless and cost-efficient choice as they allow smooth control of brake, torque, and speed. It is designed for various industrial applications, ranging from vehicles used for material transport to golf carts.
The Curtis 1204-027 has a nominal battery voltage of 24-36 volts with a current limit of 275 amperes and a 0-5K ohms throttle input. It weighs 1.8 kg and is 174 mm in length, 146 mm in width, and 70 mm in depth. It provides a better driving experience due to embedded features and optional features offered, which can be added according to the preference and demands of the desired application.
SPECIFICATIONS
VOLTAGE |
|
|
24-36 V |
|
0.35 V at 100 A |
|
16 V |
CURRENT |
|
|
275 A |
|
275 A |
|
200 A |
|
125 A |
STANDBY CURRENT |
20 mA |
OPERATING FREQUENCY |
15 kHz |
TEMPERATURE RANGE DURING OPERATION |
-25°C to 75°C |
THROTTLE INPUT |
0-5K ohms |
PHYSICAL SPECIFICATIONS
WEIGHT |
1.8 kg |
DIMENSION |
|
|
174 mm |
|
146 mm |
|
70 mm |
INSTALLATION
Curtis provides a simple wiring procedure in its motor control products so that you can fit it in your vehicle conveniently. These external components are needed along with this electric motor controller. The list is given below
Main contactor
Forward/Reverse contactors
Forward/Reverse switches
Key switch
Polarity protection diode
Control wiring fuse
Power wiring fuse
The detailed directions to install the Curtis 1204 electric motor controller is available in the instruction manual with illustrations, relevant figures, and wiring diagrams.
KEY FEATURES
Feature |
Purpose |
Brake Control and Variable Drive Speed |
Allows accurate vehicle control for an improved driving experience |
Power MOSFET |
Highly efficient and noiseless operation |
Protection and Compensation Circuit for Temperature |
Allows stable current limit and cutback function for during under and over temperature condition |
Cutback Function (Undervoltage) |
Provides protection from low battery voltage (internal and/or external) |
Pot Fault Protection |
Prevents runaway conditions |
Easy Installation |
No further alterations |
Tin-plating (Bus Bars) |
Protection for solid copper bus bars |
Push-in Connectors |
Allows control wiring |
DIMENSION
WIRING DIAGRAM