Specifications
- This is a direct bolt on aftermarket turbo.
- Same performance as the factory turbo with better price.
- Ebay Warranty and Return Policy apply to all products.
- Call us before you buy to find out how to get better deals and free upgrade warranty service.
| Part Numbers | Make | Model | Engine | Year |
| 49377-06200,36002369 | Volvo | XC70 | 3.2L | 2003-2009 |
| 8603226,49377-06201 | Volvo | XC90 | 3.2L | 2003-2009 |
| 49377-06210,49377-06212 | Volvo | S60 | 2.5L | 2003-2008 |
| 36012378,8692518 | Volvo | V70 | 2.4L | 2004-2006 |
| 49377-06202 | Volvo | S80 | 2.5L | 2004-2005 |
| Condition:100% Brand NEW |
| Bearing Type: Journal Bearing |
| Accessories: You will get exactly as shown in the picture above |
* Professional installation is highly recommended
(No Instruction Included) |
Why choose our product？
- OEM quality and size ，ensuring perfect matching with relevant parts
- Having rich experience in turbocharger production and self owned factories
- Conduct multidisciplinary testing, such as balance, housing durability, wheel load limit, sealing, etc., to fully ensure quality
- 100% balancing Test by TURBOTECHNICS VSR3，G3-min-Flow VNT Turbo testing，Advanced Actuator Tester/Programmer
Turbocharger Definition:
Turbocharger is a device driven by a turbine, and it is used to increase the performance and efficiency of an IC Engine by putting more compressed air into the engine cylinder.
Types of the Turbocharger:
There are two main types of turbochargers:
- Variable geometry turbocharger (VGT):Variable Geometry Turbocharger is commonly used in diesel engines. This type uses a variable geometry turbine housing to regulate the boost pressure.
- Wastegate turbocharger:This turbocharger uses a wastegate to regulate the boost pressure. The wastegate opens to allow exhaust gases to bypass the turbine wheel which reduces its speed and thereby regulating boost pressure.
Each type of Turbocharger has unique advantages and disadvantages, and the choice of Turbocharger will depend on the engine's specific needs and the vehicle.
Parts of Turbocharger:
Exhaust gases spin the wheel by providing the energy to drive the compressor wheel.
The rotating wheel compresses the incoming air and increases its density.
The metal casing encloses the compressor wheel, shaft, and turbine wheel.
It connects the compressor wheel and turbine wheel.
A Wastegate is a valve regulating exhaust gas flow to the turbine wheel.
Working Principle of Turbocharger:
A turbocharged engine's exhaust gases exit the engine and feed into the large opening of the turbine housing. As the gases move through the housing — which gets progressively smaller to keep velocity up — the energy spins the turbine wheel. It exits through the turbine housing outlet and into the vehicle's exhaust system.
On the opposite side of the turbocharger, the compressor wheel connects to the turbine wheel through a common shaft. The compressor wheel is contained in the compressor housing and sources its air supply externally to feed cool, fresh air into the engine. Air enters the large hole in the center of the compressor housing and is sucked through the compressor wheel's curved blades, exiting at the wheel's outer edge into the compressor housing. The housing's cross-section starts smaller and becomes progressively larger as it nears the housing outlet to help compress the air and increase its density. The increased air density results in powerful combustion leading to a greater engine power output. The Turbocharger's wastegate regulates the number of exhaust gases that reach the turbine wheel, allowing control over the boost pressure and avoiding engine overloading.The compressed air is then typically routed through an intercooler to remove heat from the air before entering the engine.
Add the appropriate amount of fuel to support the extra air forced into the engine, and power increases substantially.
Advantages of Turbocharger:
- Providing a performance upgrade
- Reducing emissions
- Increasing engine power output
- Regulating boost pressure
- Improving engine efficiency
Installation precautions：
- Clean the engine and replace the filter element. Drain the dirty oil, replace the engine oil filter and air filter, then filter and add clean lubricating oil until the oil dipstick is full.
- Check the turbocharger. Check if the new turbocharger model matches the engine.
- Check if there are any debris in the intake pipeline of the compressor and the exhaust pipeline of the turbine front engine.
- Check the inlet and return pipes of the turbocharger. If a sealing gasket is used at the inlet and outlet of the turbocharger, check if there is any corrosion or deformation on the gasket. The gasket cannot block the inlet and outlet.
- Pre lubrication booster.
Our product would not come with the instruction of installation, highly suggest you find professional mechanical to help you install it.
Maintenance precautions：
- Do not drive immediately after starting
After starting the engine, especially in winter, it should be allowed to idle for a period of time in order to fully lubricate the bearings with lubricating oil before the turbocharger rotor runs at high speed. So, after starting, do not forcefully hit the accelerator to prevent damage to the turbocharger oil seal.
- Do not immediately turn off the engine
After running at high speed for a long time, the engine cannot be immediately turned off. If the engine suddenly stops while it is hot, it can cause the oil trapped in the turbocharger to overheat and damage the bearings and shafts. Be especially careful to prevent the engine from suddenly stalling after slamming the accelerator pedal a few times.
When disassembling the turbocharger, it is important to keep it clean and block all pipe joints with clean cloth to prevent debris from falling into the turbocharger and damaging the rotor. When repairing, be careful not to collide and damage the impeller. If the impeller needs to be replaced, a dynamic balance test should be conducted on it. After reinstallation, remove the blockage. The lubricating oil pipeline should also be cleaned after running for a period of time.
- Pay attention to maintenance
Before leaving and after receiving the vehicle, the connection of each airway pipe should be checked to prevent looseness or detachment, which may cause the turbocharger to fail and air short circuit to enter the cylinder.
