If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Button control and LED indicators
1.Green indicator 4pcs are power indicators,they are 0.1mW(0)/25mW(D)/200mW(C)/800mW(H)
(D)/200mW(C)/800mW(H),the default is 0.1mW when the power is on
To the next power level.This operation can be cycled
And the corresponding power indicator will light up every time you press and hold the button
The corresponding power indicator will light up each time you press and hold the button
Note:The transmitting power must be readjusted after each power failure
The 9 red LEDs are frequency indicators
This operation can be cycled,each short press on the corresponding frequency point indicator will light up
Note:The operating system has a memory function
The system will save the current frequency point after power failure
The antenna is SMA interface,the antenna head is"male thread+hole"and the antenna pole is"female thread+pin"
Pin"configuration 1.2G special customized"Y"type antenna
Specification:
Frequency band:1060-1380MHz
Number of channels:9
Channel frequency:1080/1120/1160/1200/1240/1320/1360/1258(MHz)
Audio carrier:6.5MHz/6.0MHz
Modulation type:FM
Frequency Control/Audio Subcarrier Control:PLL
Frequency Stability:±100KHz(Typ.)
Frequency accuracy:±200KHz(Typ.)
A/V ratio:-26±2dB
Signal-to-noise ratio:>70dBc
Channel carrier power difference:1dB
Antenna port impedance:50Ω
Input signal format:NTSC or PAL
Audio/video input level range:1V±0.2Vp-p type
Operating Temperature:-10℃~+60
Input power supply:DC 7-28V
Power output:DC7.28V DC 5V
Size:As shown in the picture
Package includes:
1*1.2GVTX
Or
1*1.2GRX
Note:
Includes the above packaged products only
Specifications and parameters of the size of manual testing,for reference only
Please refer to the actual product,thank you