SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
Bluetooth 5.0 RCA Transmitter Receiver Wireless Adapter For TV PC Car Headphones
Product Description
If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Features:
1. The appearance of the product is exquisite;
2. Adopt CSR high-end chip design;
3. One-key switch between RX and TX modes;
4. RCA, I2S audio input/output interface, can be switched freely
5. Two antennas, Bluetooth operating distance>80M, strong stability;
6. High fidelity lossless sound quality, ultra-low delay sound output. Support apt-X LL, apt-X, SBC, AAC, FS.
7. Built-in 500MA battery, long battery life.
8. If the battery is below 20%, there will be a low battery reminder. The product will automatically enter the sleep power saving mode after 6 minutes in the RX, TX mode without connection, and it has its own battery protection IC, which is safe and reliable while charging.
9. Support Dual stream (TX mode) transmission can connect two Bluetooth audio devices
10. Receive (RX) can be connected to two devices at the same time, any two of the mobile phone * tablet * notebook device, the volume and up and down music can be controlled by the button during playback
11. It can realize automatic connection in receiving mode and transmitting mode, and has memory function for connected products
12. The product connection is simple, without any cumbersome driving and downloading APP;
Specifications:
Bluetooth version: Bluetooth V5.0
Support protocol: RX: A2DP AVRCP TX: A2DP
Working frequency band: 2.402GHz -2.480GHz
Power level: power level 1, 2 (Class I II)
Distortion: ≤0.1%
Support Dual stream Support Dual stream (TX mode): support (a transmitter is connected to two Bluetooth speakers or earphones at the same time using a CODEC, up to APTX LL)
Support Multipoint (RX mode): support (connect two mobile phones)
Codec method CODEC: TX: apt-X LL, apt-X, SBC, FS;
RX: apt-X LL, apt-X, SBC, AAC, FS;
Note for APTX use: Priority support for apt-X LL CODEC in single connection (the connected device must also support apt-X LL)
Built-in battery: 500MAH
Charging current: about 350MA
Charging time: about 2.5 hours
Life time: RX is greater than 10H, TX averages about 8H
Bluetooth distance: ﹥80M (unobstructed)
Charging method: Micro USB 5V/0.5A
Input/output connection mode: RCA interface, I2S AUX interface, support RCA, AUX dual simultaneous output
Compatible: Android, IOS system mobile phone and PAD, and Bluetooth speakers or earphones supporting A2DP protocol to connect and use
Package Content:
Wireless audio receiver*1
USB charging cable*1
3.5MM audio cable*1
RCA audio cable*1
Manual *1
1. The appearance of the product is exquisite;
2. Adopt CSR high-end chip design;
3. One-key switch between RX and TX modes;
4. RCA, I2S audio input/output interface, can be switched freely
5. Two antennas, Bluetooth operating distance>80M, strong stability;
6. High fidelity lossless sound quality, ultra-low delay sound output. Support apt-X LL, apt-X, SBC, AAC, FS.
7. Built-in 500MA battery, long battery life.
8. If the battery is below 20%, there will be a low battery reminder. The product will automatically enter the sleep power saving mode after 6 minutes in the RX, TX mode without connection, and it has its own battery protection IC, which is safe and reliable while charging.
9. Support Dual stream (TX mode) transmission can connect two Bluetooth audio devices
10. Receive (RX) can be connected to two devices at the same time, any two of the mobile phone * tablet * notebook device, the volume and up and down music can be controlled by the button during playback
11. It can realize automatic connection in receiving mode and transmitting mode, and has memory function for connected products
12. The product connection is simple, without any cumbersome driving and downloading APP;
Specifications:
Bluetooth version: Bluetooth V5.0
Support protocol: RX: A2DP AVRCP TX: A2DP
Working frequency band: 2.402GHz -2.480GHz
Power level: power level 1, 2 (Class I II)
Distortion: ≤0.1%
Support Dual stream Support Dual stream (TX mode): support (a transmitter is connected to two Bluetooth speakers or earphones at the same time using a CODEC, up to APTX LL)
Support Multipoint (RX mode): support (connect two mobile phones)
Codec method CODEC: TX: apt-X LL, apt-X, SBC, FS;
RX: apt-X LL, apt-X, SBC, AAC, FS;
Note for APTX use: Priority support for apt-X LL CODEC in single connection (the connected device must also support apt-X LL)
Built-in battery: 500MAH
Charging current: about 350MA
Charging time: about 2.5 hours
Life time: RX is greater than 10H, TX averages about 8H
Bluetooth distance: ﹥80M (unobstructed)
Charging method: Micro USB 5V/0.5A
Input/output connection mode: RCA interface, I2S AUX interface, support RCA, AUX dual simultaneous output
Compatible: Android, IOS system mobile phone and PAD, and Bluetooth speakers or earphones supporting A2DP protocol to connect and use
Package Content:
Wireless audio receiver*1
USB charging cable*1
3.5MM audio cable*1
RCA audio cable*1
Manual *1
We accept all payments authorized by eBay.
Copyright © 2022 Tongtool
On Apr 18, 2024 at 15:45:31 PDT, seller added the following information: