PACKAGE CONTENT: ( NOT include Raspberry Pi board.)
Wiki English manual : waveshare.com/wiki/10.3inch_e-Paper_HAT
10.3inch e-Paper x1
e-Paper IT8951 Driver HAT (B) x1
10.3inch e-Paper Adapter x1
40PIN FFC (same side contact) x1
USB Cable x1
PH2.0 20cm 8Pin x1
RPi Srews Pack x1
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for e-reader, eink monitor, industrial instruments...
Size10.3"
Resolution1872×1404
Viewing Angle>170°
Display ColorBlack and White
Grey Scale2-16 (1-4 bit)
CommunicationUSB/SPI/I80
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
RefreshingPartial Refresh Support
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
USB/SPI/I80 interface, for connecting with controller boards like Raspberry Pi/STM32, etc.
Comes with development resources and manual (examples for Raspberry Pi/STM32)
OPERATING VOLTAGE | 5V | DISPLAY COLOR | black, white |
INTERFACE | USB/SPI/I80 | GREY SCALE | 2-16 (1-4 bit) |
OUTLINE DIMENSIONS | 216.70 × 174.40mm | FULL REFRESH TIME | <1s |
DISPLAY SIZE | 209.66 × 157.25mm | REFRESH POWER | 1.2W (typ.) |
DOT PITCH | 0.112 × 0.112mm | STANDBY CURRENT | 0.1W (typ.) |
RESOLUTION | 1872 × 1404 pixels | VIEWING ANGLE | >170° |
Compatible With Raspberry Pi Series Boards
For Use With Controller Boards Like Raspberry Pi/STM32
SPI PINOUT | |
VCC | Power, 5V input |
GND | Ground |
MISO | SPI MISO pin |
MOSI | SPI MOSI pin |
SCK | SPI SCK pin |
CS | SPI chip selection, low active |
RST | External reset, low active |
HRDY | Busy status output, low active |
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...