Feature:

1. Using this kit, can make it easier to install any electric fan in your cooling system project, very convenient.
2. Can greatly protect the safety of automotive system equipment. When the short‑circuit current of the system is too large, the circuit breaker will automatically open.
3. Package including connecting wire, water temperature sensor, relay, overload protector and 8pcs wiring insulated terminal, everything you need is included.
4. Durable, not easy to damage, do not need frequent replacement, very convenient.
5. Safe plastic material, not easy to damage your car and can avoid unnecessary losses.


Specification:

Condition: 100% Brand New
Item Type: Radiator Cooling Fan Relay Kit
Material: Plastic

Application: Works for 7/8 inch Fans, 10/12/14/16/inch Fans


How to wire Single Terminal Fan Thermostat Switches:
1.These switches should be used in conjunction with a relay.
2.The switch should operate the relay and the relay should provide power to the fan since an electric fan typically draws a lot of current. When the switch closes to ground (within 170-210°C) the relay is energized and powers the fan. And the switch will open and break the ground circuit when the temperature drop.
3.The relay de-energizes and cuts power to the fan.

Installation Precautions:
(1) Turn off the engine, and after the water in the engine radiator has cooled to room temperature, replace with a new cooling fan temperature switch.
(2) Please avoid using external high temperature sources after installation.
(3) When installing, avoid sprinkling water on the surrounding automobile parts.

Direct Connect:(Fan will Opera when the ignition is "on")
1.Attach the positive fan motor wire (Blue)to a 12V positive ignition controlled source
e.g. fuse box.
Note:We recommend the use of a 20 Amp inline fuse(not included) for each fan.
2.Attach the negative fan motor wire(Black) to a suitable ground.
Note:Connect directly to battery negative terminal if possible
3.Reconnect the battery

Relay:
Black Wire: Thermostat
Blue Wire:Fan (Blue Wire On Fan)
White Wire: AUX Side On Circuit Breaker
Red Wire: Ignition Switch W/30A-40A BUSS FUSE


Package List:

1 x Connection Cable
1 x Water Temperature Sensor
1 x Relay
1 x Overload Protector
7 x Wiring Insulation Terminal
  



 

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

 

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. 

https://image-us.chengykj.com/upload/third_resource/image/feedback.jpg


We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. 

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg


On 20/04/2024 at 20:26:23 AEST, seller added the following information:

DataCaciques