MINI ELM 327 BLUETOOH is a multi-brand automotive diagnostic tool that connects to the vehicle's OBD2 (16-pin) socket

SAME DAY DISPATCH from Melbourne

Functions:

  1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
  2. Clear trouble codes and turn off the MIL ("Check Engine" light)
  3. Display current sensor data, including:
  4. Engine RPM
  5. Calculated Load Value
  6. Coolant Temperature
  7. Fuel System Status
  8. Vehicle Speed
  9. Short Term Fuel Trim
  10. Long Term Fuel Trim
  11. Intake Manifold Pressure
  12. Timing Advance
  13. Intake Air Temperature
  14. Air Flow Rate
  15. Absolute Throttle Position
  16. Oxygen sensor voltages/associated short term fuel trims
  17. Fuel System status
  18. Fuel Pressure
  19. Many others.


Supported OBD2 Protocols:

  1. SAE J1850 PWM (41.6 kbaud)
  2. SAE J1850 VPW (10.4 kbaud)
  3. ISO 9141-2 (5 baud init, 10.4 kbaud)
  4. ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
  5. ISO 14230-4 KWP (fast init, 10.4 kbaud)
  6. ISO 15765-4 CAN (11 bit ID, 500 kbaud)
  7. ISO 15765-4 CAN (29 bit ID, 500 kbaud)
  8. ISO 15765-4 CAN (11 bit ID, 250 kbaud)
  9. ISO 15765-4 CAN (29 bit ID, 250 kbaud)


Supported vehicles:

All petrol vehicles since 2001

All Diesel/LPG vehicles since October 2003

All utility vehicles since 2007

Note:

This elm327 can usually on most new cars with OBD 16pin Aadapter and 12V engine:

For USA Car brand,after 1996;
For Europe Car brand(petrol),after 2001;
For Europe Car brand(diesel),after 2004;
For Japan/Korea Car brand,after 2002;
For Chinese Car brand,after 2009;
For Indian Car brand,after 2010;
For Russian Car brand,after 2011;

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep;
Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault, Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu, Fit for Land Rover, Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar;
Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda, Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota;......

*For Ssangyong car makes, please don't purchase If your car is before 2008.
*For Renault Dacia Logan car model, please don't purchase If your car is before 2009.

If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-2 legislation.

 

In this case, OBD2 is used as a general term and can mean any of the following:

OBD II (California ARB)
EOBD (European OBD)
JOBD (Japanese OBD)

You can also consult your vehicle’s owner’s manual and perhaps contact your local dealer. However, be aware of the fact that many dealers do not know the difference between OBD and OBD2. If the vehicle is not OBD2 compliant, you cannot use a generic OBD2 scan tool such as ElmScan to obtain diagnostic information from your vehicle.

 Q: But my car has the 16-pin OBD connector, shouldn’t it be OBD2 compliant?

A: No, not necessarily. A lot of European and Asian manufacturers equipped their vehicles with D-shaped 16-pin connectors long before they began installing OBD2 systems on those vehicles. One curious thing to note here is the fact that most non-EOBD compliant vehicles had a DLC that does not fully conform to SAE J1979.


Specifications:


In Android, connecting instructions:

image.pngimage.png

image.pngimage.png

Package includes: