Leergehäuse Elektronik Netzteil Gehäuse Case 31x17.2x8.6cm für RD6006/RD6006P
Vorsichtsmaßnahmen:
- Bitte vor der Montage sorgfältig lesen. Bei Fragen wenden Sie sich bitte an uns. Da der Montageprozess Spannungen beinhaltet, die die für Menschen ertragbare Spannung überschreiten, ist der Betrieb durch Laien nicht gestattet. Treffen Sie während des Montagevorgangs gute Isolations- und Schutzmaßnahmen und platzieren Sie dieses Produkt an einem Ort, an dem Kinder und ältere Menschen schwer zu berühren sind.
- Die Schale besteht aus kaltgewalztem Stahlblech mit kunststoffgespritzter Oberfläche. Vermeiden Sie bei der Verwendung, dass Sie durch scharfe Gegenstände zerkratzt werden. Vermeiden Sie direkte Sonneneinstrahlung und feuchte Umgebung.
- Kurzschlüsse bei der Montage vermeiden und Plus- und Minuspol richtig anschließen.
- Bitte schließen Sie den Stromkreis nicht an, wenn er eingeschaltet ist. Bitte vermeiden Sie Schütteln und Stürze.
Besonderheit:
Verwendet für RD6006/RD6006-W
Es wird empfohlen ein 400W 60V Schaltnetzteil zu verwenden
Material: Stahl
Produktabmessungen: 31 x 17,2 x 8,6 cm / 12,2 x 6,77 x 3,39 Zoll
Produktgewicht: Ungefähr 1,3 kg
Paket beinhaltet:
1 x Gehäuse set
Notiz:
- RD6006 Netzteil ist nicht im Lieferumfang enthalten. Bitte separat erwerben.
- Die Schale ist weich und kann sich beim Transport leicht verformen. Sollte bei der Montage eine Lücke entstehen, begradigen Sie diese bitte vor der Montage etwas.
- Es wird empfohlen, das S-400-60 60V 6A Vorverstärker-Netzteil zu verwenden. Bei anderen Netzteilen achten Sie bitte auf die Lochabstände unserer Artikel.
Precautions:
- Please read carefully before assembly. If you have any questions, please contact us. Because the assembly process involves voltages that exceed the voltage that human can withstand, non-professionals are not allowed to operate. During the assembly process, take good insulation and protective measures, and place this product in a place where children and the elderly are difficult to touch.
- The shell is made of cold-rolled steel plate with plastic sprayed surface. When using, prevent from being scratched by sharp objects. Avoid direct sunlight and humid environment.
- Prevent short-circuit during assembly and connect the positive and negative poles correctly.
- Please not connect the circuit when it is power-on. Please avoid shaking and falling.
Feature:
Used for RD6006/RD6006-W
It is recommend to use a 400W 60V switch power supply
Material: Steel
Product Dimension: 31x17.2x8.6cm/12.2x6.77x3.39inch
Product weight:About 1.3kg
Package includes:
1 x Housing set
Note:
- RD6006 Power supply is not included in the package. Please purchase separately.
- The shell is soft and may deform slightly during transportation. If there is a gap during assembly, please straighten it slightly before assembling.
- It is recommended to use with S-400-60 60V 6A preamp power supply. In terms of other power supplies, please make sure that it fits the hole spacing of our items.
Marke | Markenlos |
---|---|
Herstellernummer | N/A |
Merkmal 1 | Kreatives Design, langlebiges Material, schönes Aussehen |
Material 1 | hohe Qualität,Stabile Eigenschaft |
Produktart | Gehäuse set |
Material | Stahl |
Farbe | wie das bild zeigt |
Spannung | 60V |
Kastenform | Rechteckig |
Finish | Stahl |
Schutzart | Does not apply |
Besonderheiten | Does not apply |
Anwendung | Does not apply |
Stecker-Typ | Does not apply |
Stromart | Does not apply |
Geeignet für | Does not apply |
Maximale Stromstärke | Does not apply |
Modell | Does not apply |
Nennstrom | Does not apply |
Smart Home Kommunikationsprotokoll | Does not apply |
Smart Home Kompatibilität | Does not apply |