NICHE Charger Part Number: 519-CBC2225H

Includes: (1) Battery Charger, (1) Alligator Clips, (1) Fused Ring Terminal Harness, (1) Manual

Designed for your high performance Lithium (LiFePO4 / LiFe / LFP) battery

Compatible With OEM Brands such as Yuasa, Honda, Polaris, Yamaha, Kawasaki, Can-Am, John Deere, Cub Cadet, and Many More

Activated Voltage 7.3V for 12V battery; Charging Voltage 12.6V?0.2V for 12V Li-ion battery, 12.6V?0.2V for 12V LiPo battery, 14.6V?0.2V for 12V LiFePo4 battery; Amperage 1.5A

LED green light will turn on when the charger is plugged in,LED red light will turn on if the charger is connected incorrectly or if a short circuit is detected; If the charger is connected incorrectly and there is reverse polarity or a short circuit is detected, the red LED light will turn on. The battery charger will not start charging until the polarity connection or the short circuit issue have been resolved.

Ability to charge different types of lithium batteries: The default mode is set to charge a lithium-ion (Li-ion) or a lithium polymer (LiPo) battery, the Li-ion text will show on the LCD display. Press the MODE button to change the mode to charge a lithium iron phosphate (LiFePO4) battery, the Li-Fe text will show on the LCD display. Input AC cable is 3.3 feet; Output cable is 6 feet; The clips cable and the ring terminal ring are both 1 feet

Battery Status
There is an LED green light that will turn on when the charger is plugged in. There is also an LED red light that will turn on if the charger is connected incorrectly or if a short circuit is detected. When the battery is connected correctly, the LCD panel will display the battery voltage indicator. The charging symbol will flash as the battery is charging. When the battery is fully charged, the charging symbol will disappear. The battery bar will also flash as the battery is charging, and the bars will increase as the charge of state increases. When the battery is fully charged, the battery bar will stop flashing, and the four battery bars will remain on the LCD display

Charging Modes
This battery charger does not have the modes that you have asked about. However it is able to charge different types of lithium batteries: The default mode is set to charge a lithium-ion (Li-ion) or a lithium polymer (LiPo) battery, the Li-ion text will show on the LCD display. Press the MODE button to change the mode to charge a lithium iron phosphate (LiFePO4) battery, the Li-Fetext will show on the LCD display.