Features:
Warranty: 3 YEAR
Returns: 30 days
Package Include:
Interchange For Part Number: 234-4011, 13539, 13099, 24169
Built and tested to strict quality control standards
Fit Vehicle:(Please refer to the compatibility table for details).
1992/1995 Honda Civic 1.5L Only fit: D15B7 Engine; Position: Upstream
1993 Honda Civic del Sol 1.6L Position: Upstream
1993-1992 Acura Integra 1.8L Position: Upstream
1993-1992 Acura Integra 1.7L Position: Upstream
1994-1993 Honda Civic 1.5L Only fit: D15B7 Engine/D15B8 Engine; Calif.; Position: Upstream
1995-1992 Honda Civic 1.6L Position: Upstream
1995-1993 Honda Civic 1.5L Only fit: D15Z1 Engine; Calif.; Position: Upstream
1995-1993 Honda Civic del Sol 1.5L Position: Upstream
1995-1994 Honda Civic del Sol 1.6L Only fit: SI Model; Position: Upstream
1997-1996 Honda Civic del Sol 1.6L Only fit: Eng: D16Y7/Eng: D16Y8; Position: Upstream
1998/2000 Honda Civic 1.6L Only fit: Eng: D16B5; Position: Downstream
1998-1996 Honda Civic 1.6L Only fit: Eng: D16Y7/Eng: D16Y8; Position: Upstream
1999-1997 Acura CL 3.0L Position: Upstream
2000-1996 Honda Civic 1.6L Only fit: D16Y5 Engine; Automatic CVT Trans; Position: Upstream
2000-1999 Honda Civic 1.6L Only fit: Eng: D16Y7; Position: Upstream
2001 Acura CL 3.2L Fit upstream oxygen sensor
2002-1998 Honda Accord 3.0L Position: Upstream
2004-1999 Honda Odyssey 3.5L Position: Upstream
2007-2003 Honda Accord 3.0L Only fit: Auto Trans; Position: Downstream Front
2007-2005 Honda Odyssey 3.5L Position: Downstream Front
2010-2008 Honda Odyssey 3.5L Only fit: Eng: J35A6; Position: Downstream Front
Upstream location is between the catalytic converter and the engine
Downstream location is between the catalytic converter and the tailpipe
Please check fitment notes, pictures and interchange part number for accurate information, and pay more attention to confirm the connector of this item is whether matched with your car before purchase. Have a happy shopping.
The oxygen sensor is a device which determines the oxygen content of the exhaust gas. Since the amount of oxygen in the exhaust gas is a very good indicator of combustion efficiency, it is also the best place to monitor the air fuel ratio.
Our Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.
Improved Engine Response & Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications
Step1.Park your Vehicle, set the parking brakes and open the hood
Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery.
Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down.
Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it.
Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor.
Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer.
Step7.Connect the oxygen sensor wire harness by plugging it in.
Please use the link "Ask the Seller Question" or send "eBay message" in you "My eBay" to contact us if you have problems, special requests or suggestions, we are very glad to help you anytime. we will reply you within 24 hour.