1-00-00888-20 Stove Door Gasket for Harman Pellet Stoves P68, P43, P61, Accentra 52i, P35i, XXV, Advance, P38, PC45 and Harman Woodstoves 300i, 1/2" x 20FT Fiberglass Rope Seal Replacement.
Product Description
✅Fits Harman Stoves Models: 300i, Absolute 63, Accentra 52i, Accentra 52i TC, Accentra Cast Free Standing, Accentra Insert, Advance, Exception F200, Exception TL200, HF60, Invincible Insert, Invincible RS, Invincible T, Magnum (44 Mag), Oakleaf, Oakwood, P35i, P35i-C, P38, P38+, P43, P43-C, P61, P61-C, P61A, P68, P68-C, PC45, Pellet Pro II, Super Magnum Stoker, TL2.0, TL2.6 (Legs), TL2.6 (Pedestal), TL300, TLC2000 (Pre: 008860387), XXV, XXV TC. ✅Fits Legacy Stoves Models: Super Magnum Stoker, TL
➤1-00-00888-20 Gasket Specifications- Length: 20FT, Width: 1/2''. Color: White. Material: Fibreglass. Edge Seal Style: Bulb. Maximum Temperature: 1,000° F to 1,499° F, suitable for use in continuous temperatures of up to 1000°F (540°C). NOTE: Excluding Adhesive (This gasket requires either stove cement or RTV silicone to install.)
➤High Temperature Gasket - Our harman p68 fibreglass is a very heat resistant material, which makes it perfect for use in stoves. A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals. They’re flexible and will conform to uneven surfaces, so can help stoves to provide an airtight seal when the door is closed.
➤To Install A Gasket - (1) Lay the start of the gasket at the middle of one side of the door. (2) Gently lay the remaining length of the gasket into the channel around the stove. Don’t pull at or push on the rope as it is laid on the stove.(3) Press the rope gently into the door as it is laid. (3) Once the end of the gasket meets the start, lightly squash the end up against the start of the rope so that a tight seal is provided.
➤Fitment Note - Gasket cement is difficult to use on stove doors that cannot lay flat during setup. Gasket cement is also more work to use if silicone has been used in the past as you will need to remove most of the RTV to get the cement to stick to the metal. RTV silicone is recommended. Use BLACK RTV. If the silicone slips past the gasket during setup, it will not be quite as noticeable as orange or red.
➤1-00-00888-20 Gasket Specifications- Length: 20FT, Width: 1/2''. Color: White. Material: Fibreglass. Edge Seal Style: Bulb. Maximum Temperature: 1,000° F to 1,499° F, suitable for use in continuous temperatures of up to 1000°F (540°C). NOTE: Excluding Adhesive (This gasket requires either stove cement or RTV silicone to install.)
➤High Temperature Gasket - Our harman p68 fibreglass is a very heat resistant material, which makes it perfect for use in stoves. A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals. They’re flexible and will conform to uneven surfaces, so can help stoves to provide an airtight seal when the door is closed.
➤To Install A Gasket - (1) Lay the start of the gasket at the middle of one side of the door. (2) Gently lay the remaining length of the gasket into the channel around the stove. Don’t pull at or push on the rope as it is laid on the stove.(3) Press the rope gently into the door as it is laid. (3) Once the end of the gasket meets the start, lightly squash the end up against the start of the rope so that a tight seal is provided.
➤Fitment Note - Gasket cement is difficult to use on stove doors that cannot lay flat during setup. Gasket cement is also more work to use if silicone has been used in the past as you will need to remove most of the RTV to get the cement to stick to the metal. RTV silicone is recommended. Use BLACK RTV. If the silicone slips past the gasket during setup, it will not be quite as noticeable as orange or red.