• Feature：
  • Automatic Voltage Regulator AVR VR6 K65-12B K125-10B for Caterpillar Generator
  • K65-12B KATO AVR
  • Power: SHUNT EXCITED 
  • Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase 
  • PMG EXCITED   63-105 Vac    100/240 Hz   3 phase 
  • Sensing input: 180-280 Vac,  50/60 Hz   1 OR 3 phase 
  • CT input: 1 or 5 Aac  50/60 Hz 
  • ACC input: +/- 3 Vdc.   Output: 65 Vdc @ 12 Adc
  • Unit Type: piece
  •  
  • Please check pictures for more details:

    • VR6 AVR K125-10B K65-12B For Caterpillar Generator Automatic Voltage Regulator

    Feature：

    Automatic Voltage Regulator AVR VR6 K65-12B K125-10B for Caterpillar Generator

    K65-12B KATO AVR

    Power: SHUNT EXCITED 

    Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase 

    PMG EXCITED   63-105 Vac    100/240 Hz   3 phase 

    Sensing input: 180-280 Vac,  50/60 Hz   1 OR 3 phase 

    CT input: 1 or 5 Aac  50/60 Hz 

    ACC input: +/- 3 Vdc.   Output: 65 Vdc @ 12 Adc

    Unit Type: piece

     

    Please check pictures for more details:

    Specification K65-12B K125-10B
    Output power (with a 240
    Vac Input):    		 12 Adc   65 Vdc maximum
    continuous.
    25 Adc   125 Vdc forcing for 10
    seconds.    		 10 Adc   125 Vdc maximum
    continuous.
    20 Adc   250 Vdc forcing for
    10 seconds.
    AC input power: 100 to 280 Vac, single-phase 50
    to 400 Hz, or 63 to 105 Vac; three phase,
    50 to 400 Hz, 1092 VA
    maximum continuous burden    		 180 to 280 Vac, single phase
    or three-phase, 50 to
    400 Hz, 1750 VA maximum
    continuous burden
    AC sensing voltage: 90 to 140 Vac, 50/60 Hz; single- or
    three-phase.    		 90 to 140 Vac, 50/60 Hz;
    single- or three-phase.
    External voltage adjust
    rheostat:    		 10k ohm, 2 W, potentiometer 10k ohm, 2 W, potentiometer
    Regulation accuracy: ±0.5% Average responding ±0.5% Average responding
    Voltage drift: ±1% voltage variation for a 40° C
    (104° F) change.    		 ±1% voltage variation for a
    40° C (104° F) change.
    Response time: < 4 milliseconds < 4 milliseconds
    Frequency compensation: 1 or 2 V/Hz jumper selectable with
    knee adjustable from 45 Hz to 65
    Hz.    		 1 or 2 V/Hz jumper selectable
    with knee adjustable from 45
    Hz to 65 Hz.
    EMI suppression: Internal filter Internal filter
    Voltage Build-Up: Internal provisions for automatic
    voltage build-up from generator
    residual voltages as low as six Vac.    		 Internal provisions for
    automatic voltage build-up
    from generator residual
    voltages as low as six Vac.
    Over excitation shutdown: Over excitation protection starts
    timing at 90 Vdc ±5% and takes
    the output to zero in greater than
    30 seconds. The output can be 125
    Vdc for greater than 10 seconds.    		 Over excitation protection
    starts timing at 180 Vdc ±5%
    and takes the output to zero
    in greater than 30 seconds.
    The output can be 250 Vdc
    for greater than 10 seconds.
    Droop 1 Aor 5 A, <10 VA, adjustable from
    0 to 10% at rated input current, 0.8
    power factor    		 1 Aor 5 A, <10 VA, Adjustable
    from 0 to 10% at rated input
    current, 0.8 power factor
    UL recognized/CSA
    certified    		 UL Recognized per Standard 508,
    UL File NO. E97035. CSA certified
    per Standard CAN/CSA-C22.2 No.
    14-95, CSA File No. LR 23131    		 UL recognized per Standard
    508, UL File NO. E97035.
    CSA certified per Standard
    CAN/CSA-C22.2 No. 14-95,
    CSA File No. LR 23131
     

     

    Description：

    Good quality, good operation

     

    Package List:

    1 × AVR VR6

    1 × product Instructions

     

    Notes:

    Pls check your old picture or model when you order it.

    If you are uncertain about the item,please feel free to contact us for confirm.

    Sorry for any inconvenience caused.

    Full refund guarantee if does not fit.  

    Thank you for your understanding


    Item Specifics
    Brand ignparts
    MPN IGN326112
    Type AVR VR6
    Quantity 1 PC
    Specification NO
    Model R230
    Equipment Type Voltage Regulator
    Warranty 1 Year

    Payment

    Shipping

    1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    2.Items will be shipped within 1-3 business day when we received payment.
    3.Delivery time depends on destination and other factors;

    Returns

    Refund is valid within 30 days after the payment date

    Please contact us if item is defective or damaged during transport,please given photographic proof by customer via eBay message.we wil arrange exchange or refund according to buyer's require once approved,please don't open request before communicating.

    Contact Us

    IGNPARTS is a prfessional parts company and serving US market.
    Warehouses located in California and New Jersey, offering High quality Automobile , ATV/UTV & Motorcycle Ignition system accessoriess,especially ATV/UTV Parts.

    Shop Category
     Store Home
     Air Filter
     Belt
     Handlebar
     Brake Caliper
     Brake System
     Carburetor
     CDI
     Clutch Kit
     Cover
     Frame & Fender
     Fuel Pump
     Fuel Valve Petcock
     Gasket Set
     Signal light
     Handlebar Switch
     Headlight
     Tail light
     Ignition Coil
     Ignition Switch
     Intake Manifold Boot
     Rear Mirror
     Rebuild Kit
     Regulator Rectifier
     Relay
     Sensor
     Shocks
     Starter
     Starter Recoil
     Wiring Harness
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    VR6 AVR K125-10B K65-12B For Caterpillar Generator Automatic Voltage Regulator

    Feature：

    Automatic Voltage Regulator AVR VR6 K65-12B K125-10B for Caterpillar Generator

    K65-12B KATO AVR

    Power: SHUNT EXCITED 

    Input: 180-280 Vac, 50/60 Hz, 1 OR 3 phase 

    PMG EXCITED   63-105 Vac    100/240 Hz   3 phase 

    Sensing input: 180-280 Vac,  50/60 Hz   1 OR 3 phase 

    CT input: 1 or 5 Aac  50/60 Hz 

    ACC input: +/- 3 Vdc.   Output: 65 Vdc @ 12 Adc

    Unit Type: piece

     

    Please check pictures for more details:

    Specification K65-12B K125-10B
    Output power (with a 240
    Vac Input):    		 12 Adc   65 Vdc maximum
    continuous.
    25 Adc   125 Vdc forcing for 10
    seconds.    		 10 Adc   125 Vdc maximum
    continuous.
    20 Adc   250 Vdc forcing for
    10 seconds.
    AC input power: 100 to 280 Vac, single-phase 50
    to 400 Hz, or 63 to 105 Vac; three phase,
    50 to 400 Hz, 1092 VA
    maximum continuous burden    		 180 to 280 Vac, single phase
    or three-phase, 50 to
    400 Hz, 1750 VA maximum
    continuous burden
    AC sensing voltage: 90 to 140 Vac, 50/60 Hz; single- or
    three-phase.    		 90 to 140 Vac, 50/60 Hz;
    single- or three-phase.
    External voltage adjust
    rheostat:    		 10k ohm, 2 W, potentiometer 10k ohm, 2 W, potentiometer
    Regulation accuracy: ±0.5% Average responding ±0.5% Average responding
    Voltage drift: ±1% voltage variation for a 40° C
    (104° F) change.    		 ±1% voltage variation for a
    40° C (104° F) change.
    Response time: < 4 milliseconds < 4 milliseconds
    Frequency compensation: 1 or 2 V/Hz jumper selectable with
    knee adjustable from 45 Hz to 65
    Hz.    		 1 or 2 V/Hz jumper selectable
    with knee adjustable from 45
    Hz to 65 Hz.
    EMI suppression: Internal filter Internal filter
    Voltage Build-Up: Internal provisions for automatic
    voltage build-up from generator
    residual voltages as low as six Vac.    		 Internal provisions for
    automatic voltage build-up
    from generator residual
    voltages as low as six Vac.
    Over excitation shutdown: Over excitation protection starts
    timing at 90 Vdc ±5% and takes
    the output to zero in greater than
    30 seconds. The output can be 125
    Vdc for greater than 10 seconds.    		 Over excitation protection
    starts timing at 180 Vdc ±5%
    and takes the output to zero
    in greater than 30 seconds.
    The output can be 250 Vdc
    for greater than 10 seconds.
    Droop 1 Aor 5 A, <10 VA, adjustable from
    0 to 10% at rated input current, 0.8
    power factor    		 1 Aor 5 A, <10 VA, Adjustable
    from 0 to 10% at rated input
    current, 0.8 power factor
    UL recognized/CSA
    certified    		 UL Recognized per Standard 508,
    UL File NO. E97035. CSA certified
    per Standard CAN/CSA-C22.2 No.
    14-95, CSA File No. LR 23131    		 UL recognized per Standard
    508, UL File NO. E97035.
    CSA certified per Standard
    CAN/CSA-C22.2 No. 14-95,
    CSA File No. LR 23131
     

     

    Description：

    Good quality, good operation

     

    Package List:

    1 × AVR VR6

    1 × product Instructions

     

    Notes:

    Pls check your old picture or model when you order it.

    If you are uncertain about the item,please feel free to contact us for confirm.

    Sorry for any inconvenience caused.

    Full refund guarantee if does not fit.  

    Thank you for your understanding



    1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
    2.Items will be shipped within 1-3 business day when we received payment.
    3.Delivery time depends on destination and other factors;

    Refund is valid within 30 days after the payment date

    Please contact us if item is defective or damaged during transport,please given photographic proof by customer via eBay message.we wil arrange exchange or refund according to buyer's require once approved,please don't open request before communicating.

    IGNPARTS is a prfessional parts company and serving US market.
    Warehouses located in California and New Jersey, offering High quality Automobile , ATV/UTV & Motorcycle Ignition system accessoriess,especially ATV/UTV Parts.


    All rights reserved.