Product description:

Product specifications:

Power: AC110-220V

Voltage setting: Discharge: 0.00-30.00V, minimum step size 0.01V

Charging: 0.00-22.00V, minimum step size 0.01V

Current setting: Discharge: 0.05-10.00A minimum step size 0.01A (automatic current limit when power exceeds limit)

Charging: 0.05-5.00A minimum step size 0.01A (maximum current limited by supply current)

Discharge mode: DSC-CC: constant discharge current for testing battery capacity or supply current

DSC-CP: Constant discharge power for simulating constant power equipment or testing power supply

Charging method: standard charging: support nickel hydrogen, nickel chromium, lithium, iron lithium, lead acid

CHG-CV: Custom constant current constant voltage charging, only for batteries

Automatic charge and discharge: support automatic charging - discharge - charging mode for testing battery capacity

Voltage test: 0.002-4.500V (low voltage) accuracy is 0.003V, error ± 0.5%

4.50V-30.00V (high voltage) accuracy to 0.01V, error ± 0.5%

Current test: 0.05-10.000A, accuracy 0.005A, error ±0.5%

Capacity test: 10Ah, resolution is 0.001Ah

10AH-100Ah, resolution is 0.01Ah

Above 100Ah, resolution 0.1Ah

Connection method: four-wire detection, separate wiring of voltage and current channels to ensure measurement accuracy

LCD display: voltage, current, capacity, time, power, energy test data

Computer online: dedicated USB to TTL serial port (Mini USB interface, non-ordinary USB cable) computer control, curve drawing, calibration benchmark test, firmware upgrade, cycle charge and discharge.

Tip: A + V + is connected to the positive battery, A_V_ is connected to the negative battery

The package includes:

1X tester

1X on-line line

2X1 pairs test clip

1X power cord

Note:

Built-in 24V power module.