1. Take out the small roller and edger handle
2. Remove the screws from the handle, and remove the cover and cover ring from the roller
3. Aim at the back of the roller with the handle and install it
4. Install the screws on the handle head inside the roller
5. Close the cover ring
6. Close the cover
7. Finish to use
Note:
1.Before the first use rinse the roller under a tap then dry.
2.Do not fill too full. Fill 50%-70% full with paint every time is enough. This kind of paint roller will leak a little if it's too full.
3.Please allow 1-3cm measuring deviation due to manual measurement.
Decorate your home just go easier with this paint roller set. Even your kid and old people can handle it!
Can be washed, unlimited reusable!
There are 3 extensible threaded poles, you don't need to climb up and down ladders when painting.
Handle paint roller is made of super fine flocked, which can hold a large amount of paint and release it evenly for a quick finish painting.
Package include:
1 X Paint Runner Pro
1 X Flocking Edging Machine
1 X Corner Knife Painter
1 Resting Tray
1 Easy-flow paint pouring jug
1 X Stainless steel tube
Color box
Warning: Do not exposure the brush under the sun too long , otherwise the plastic brush will become brittle easily.
|
|
|
|
---|---|---|---|
Corner CutterThe corner cutter painter is for painting corners or edges. |
Flocked EdgerThe flocked edger is for painting narrow surface, such as door frames, window sills. |
Telescopic PolesTotally 78cm. Help you get high place without ladder. |
Paint Runner ProThe paint runner pro is for painting large surface, such as wall, door, floor, ceiling, roof. |