Features:
125khz for 5200/T5577, ID 125khz chip card is empty, card number needs to be written, Rewriteable, IC 13.56mhz card is uid card
Crack special IC encryption card, copy IC/ID card, support HID-125KHZ.
Support reading chip:TK4100/EM4100/EM4200/TK4100- d /TK4168/S50/S70/F08
Support write chip:T5577/EM4305/5200/8265/5300/8800/UID/CUID/FUID/UFUID
1)Support IC/ID dual frequency copy
2)No need to download software to install
3)The software can be found when the RFID reader is connected to the computer with a USB cable
4)Support ID125K, 8800, 5200, 4305, 5577
5)Support UID FUID CUID UFUID IC semi-encrypted card, IC fully encrypted card
6)With USB full speed interface
7)Two-colour LED light prompt (red for standby, green for working)
8) Built-in buzzer "beep" to remind
The software does not support Apple systems, but supports virtual machines
Specifications:
Dimensions:108(L)x68(W)x12mm(H)
Interface: USB full speed
Operating voltage:5v DC
Operating current:200mA
Standby current:50mA
Normal current:100mA
Operating frequency:125KHz / 13.56 MHz
Smart card support: For 125KHz ID types: EM4100, TK4100, 8800, 5200, EM4305, T5577 etc.
For 13.56 MHz IC types: UID FUID CUID UFUID IC semi-encryption, IC full encryption, etc.
Supported operating systems: Windows computers are supported. Linux, Mac are not supported.
How to use the card reader?
1)Connect the device to your computer with a USB cable.
2) You can find and open the software on your computer.
To read or write a normal 125KHz RFID card:
1. Place the card on the reader and press "Read" on the software to scan the card.
2. The software will scan and display the card number
3. Place the writable T5577 (125KHz writable chip) on the reader and press "write" on the software.
To read and write 13.56MHz IC, IC semi-encrypted card, IC fully encrypted card:
1. Place the card on the reader and press "card number" or "start decoding" on the software.
2. The software will scan and display the card number
3. Place the writeable UID (13.56MHz writeable chip) on the card reader and press "Write card" on the software.
Packaging Includes:
1pcs*Card Reader
1pcs*USB Cable