eBay

Feature:

1. Stepper motor driver's quiescent current will be automatically halved and it is with 8 available output currents, which can be up to 4.0A.
2. With built-in temperature protection and overcurrent protection, motor driver supports H-bridge bipolar constant-phase drive.
3. As the upgraded version of TB6600, the subdivision is increased to 32 subdivisions, suitable for high subdivision purposes.
4. Keeps input high-speed photoelectric isolation, driver board provide energy-saving semi-automatic current lock function.
5. The semi-closed casing can adapt to more severe environment. And this driver board keeps simple installation.

Specification:

Item Type: Stepper motor driver
Model: TB6600 upgraded version
DC Power Supply: 9V-40V DC power supply
Eight Kinds of Output Current Available: Maximum 4.0A
6 Subdivision Modes Available: 32 subdivisions
Standard Common Positive Single Pulse Interface: Yes
Offline Hold Function: Support
Protection: Built-in temperature protection and overcurrent protection
Weight: Approx. 201 g / 7.1 oz
Applicable Stepper Motors: 42, 57 and 86 type 2 phase 4 phase (4-wire 6-wire 8-wire)
Definition of Terminal:
Input:
⑴CP+: Pulse input positive terminal.
⑵CP-: Pulse input negative terminal.
⑶DIR+: Positive end of motor forward and reverse control.
⑷DIR-: The negative end of the motor's positive and negative control.
⑸Enable+: Positive end of motor offline control.
⑹Enable-: Motor off-line control negative terminal.
Motor Winding Connection:
⑴A+: Connect the A+ phase of the motor winding.
⑵A-: Connect the A-phase of the motor winding.
⑶B+: Connect B+ phase of motor winding.
⑷B-: Connect B-phase of motor winding.
Working voltage connection:
⑴Volt Current Condenser: DC power supply is positive (note: 10V ＜VCC ＜42V).
⑵Ground: Negative DC power supply
Input: Optocoupler isolation connection
Two Connection Methods for Input Interface: The user can adopt the common anode connection method or the common cathode connection method as needed.
1. Common Anode Connection Method: Connect CP+, DIR+ and EN+ to the power supply of the control system respectively. If the power supply is +5V, it can be directly connected. If the power supply is higher than +5V, an external current limiting resistor R must be added. To keep that the drive current of 8-15mA is provided to the internal optical coupling of the driver. The pulse input is accessed through CP-; at this time, DIR- and Enable- are active at low level.
2. Common Cathode Connection: Connect CP-, DIR-, Enable- to the ground terminal of the control system (SGND, isolated from the power ground); the +5V pulse input is added through CP+; at this time, DIR+, Enable+ are in Active high. The connection value of the current limiting resistor R is the same as the common anode connection method.

Package List:

1 x Stepper Motor Driver

Note:

The Enable terminal can not be connected. When Enable is valid, the motor rotor isin a state (offline state). At this time, you can manually turn the motor shaft tomake adjustments suitable for you. After manual adjustment is completed, set Enable to invalid state to continue automatic control.

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg

On May 6, 2024 at 00:56:48 PDT, seller added the following information: