60L/15 Gal Aquarium Water Inline Chiller Cooling Machine Fish Shrimp Tank Cooler
The machine is not suitable for soilless cultivation or hydroponics. For soilless cultivation or hydroponics, at least 300 liters are required.
Contact seller to get English manual, Please ! 
 
Product Type and Parameters:

Structure Type: Electronic Refrigeration

Project Type: Low Temperature Chiller

Type: Inline Chiller

Tank Capacity: 15 Gallons.

Water Type: All Water Types

Applicable Water Pipe: Water Pipe with Inner Diameter of 8mm

Suitable for Water Flow: 1-3l/Min

Suitable for Lift: less than 3m

Power Cord Length: 1.5m, 3 Feet Flat Plug

Temperature Control Probe Line Length: 2m

Features:
Quiet, Low Power Design.
Easy to Set up.
The Temperature Is Clear at a Glance.
Fresh Water Tanks, Water Tanks, and Sea Water Tanks Are Common.

Description:
It Must Be Used with a Water Pump and Installed Directly in the Middle of the Water Circulation Pipe.

Installation Method:
Connect the Pump in Series Between the Water Cooler and the Fish Tank.

Precautions:
1. Transportation, Installation, Maintenance, Etc. Be Careful.
2. Keep a Distance of 10 Cm or More Between the Machine and the Surrounding Space to Facilitate the Cooling Airflow.

The Package Contains:
1*60l Refrigerator
 

Operation Steps:

1.Open the package,take out the product and install it

2.Please make sure there is more than 20cm space in front of and behind the cooler

3.Please make sure that the water pipe and the inlet and outlet pipes are well connected without water leakage

4. Turn on the power supply of the circulating equipment and make sure that the water in the fish tank begins to circulate,and check whether there is water leakage.

5.Turn on the water cooler,plug in the power plug, press the power switch to turn on the power, and the temperature of the fish tank will be displayed on the display screen

6. To set the temperature,press the set key(set the shutdown temperature),▲heating key or Wcooling key to adjust to the appropriate temperature.(press Ret key after stting or return to current temperature automatically after about 10 seconds)

7.Press the set key for a long time to display the FI retur difference code(shutdown temperature plus retur difference temperature is equal to the starting temperature)and set ▲ heating key or Wcooling key to adjust to the appropriate temperature.

 
PushAuction


On May 6, 2024 at 20:18:42 PDT, seller added the following information:

DataCaciques