6 In. Plastic Square Drainage Grate in Green
- Drain grate connects to 3 in. & 4 in. drain pipes & fittings
- Drain grate blocks debris from entering & clogging drainage pipes
- 32 GPM flow rate; drains small lawns, landscaped areas, patios
Drain the stormwater into your drainage system, not the leaves and debris that can potentially clog it. The 6 in. Square Drain Grate, also known as a drain cover is a good choice for draining light flows of stormwater from small lawns, landscaped areas, patios, and walkways to drain pipe. The 6 in. Drain Grate has an open surface area of 10.4 sq. in. and flow rate of 32 GPM. The square grate has a flared-out design for more open surface area and flow capacity compared to a round grate matching the pipe diameter. Connects to 3 in. & 4 in. sewer and drain pipes & fittings, 3 in. & 4 in. single-wall corrugated pipes, and 3 in. & 4 in. triple-wall pipes for a soil-tight fit. Ideal where there isn't enough depth for a catch basin. The pipe grate is ADA Compliant and heel-proof. Made of polyethylene, a type of plastic, using a mix of virgin and recycled content treated with UV inhibitors to prevent fading and cracking. As part of a complete drainage system, the grate drains water and prevents debris from entering drain pipes. Pipes carry the water to a discharge point downstream such as a pop-up emitter, or to percolate into the ground with a dry well or infiltration trench. Find the right drainage grate for your project with the free NDS Home Drainage Center tool at ndspro.com/home-drainage. NDS, founded in 1972, is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
- Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways
- Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, and 3 in. & 4 in. Triple-Wall Pipes
- 10.4 sq. in. open surface area
- 32 GPM flow rate
- Rated for NDS Class A loads (up to 60 psi) when properly installed-recommended for pedestrians, bicycles, and wheelchair traffic; ADA compliant and heel-proof
- Grate is 2 in. high; top is 5-7/8 in. square; grate openings are ¼ in. wide
- 6 in. Square Drain Grates are available in a variety of colors and materials
- Comes with one 6 in. Square Grate
- Works with connected drain pipe to capture and convey excess surface water for proper release downstream
- Place on top of drain pipe or drain fitting for a soil-tight fit
- High-density polyethylene (HDPE) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
- Use sewer and drain fittings when you need to make turns from the drain grate to drain pipe
- Use with a Pop-Up Drainage Emitter to discharge collected water at a point of release downstream
- Use with a Flo-Well Dry Well System and EZ Drain Gravel-Free French Drain System to detain excess water and slowly release it into the ground
- Onsite stormwater management protects the watershed downstream, and limits excess runoff which can lead to negative impacts such as erosion, pollution, and flooding
- Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management with proven products, tools, and support to help you get the job done right