6 In. Plastic Square Drainage Grate with Adapter in Black
- Grate with adapter fits 3 in. & 4 in. drain pipes & fittings
- Grate with low-profile adapter blocks debris from drainage pipe
- 44 GPM flow rate; drains downspouts, lawns and landscaped areas
Capture and funnel moderate flows of stormwater to pipe with the 6 in. Square Drain Grate with Low-Profile Adapter. The flared-out design gives you more open surface area and flow capacity compared to a round grate that matches the pipe diameter, while preventing debris from entering the pipeline. Ideal for lawns, landscaped areas, patios, walkways, and under downspouts. The 6 in. Square Drain Grate (also known as a Drain Cover) has an open surface area of 14.4 sq. in. & 44 GPM flow rate. Pipe grate is ADA Compliant & heel-proof. Adapter connects to 3 in. & 4 in. sewer and drain pipes & fittings, single-wall corrugated pipes, & triple-wall pipes. The grate and adapter are made of a combination of virgin and recycled polyethylene, a type of plastic, treated with UV inhibitors to prevent fading and cracking. Removable grate makes it easy to access the drain pipe. As part of a complete drainage system, the grate drains water and blocks leaves and debris, and the adapter collects and directs water to drain pipes, which carry it to a discharge point downstream such as a pop-up emitter, or to percolate into the ground with a dry well or infiltration trench. Start now and find the right drainage solution for your project with the free NDS Home Drainage Center tool at ndspro.com/home-drainage. NDS, founded in 1972, is the preferred choice of professionals and the leader in stormwater management solutions with proven products, tools, and support to help you get the job done right.
- Protect your drainage system by using a grate and low-profile adapter on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts
- Fits 3 in. & 4 in. Sewer and Drain Pipes & Fittings, 3 in. & 4 in. Single-Wall Corrugated Pipes, 3 in. & 4 in. Triple-Wall Pipes
- 14.4 sq. in. open surface area
- 44 GPM flow rate
- Rated for NDS Class A loads (up to 60 psi) when properly installed-recommended for pedestrians, bicycles, and wheelchair traffic; ADA compliant and heel-proof
- Grate top is 5-7/8 in. square with ¼ in. grate openings; Low-profile adapter is 2-1/2 in. high, top opening is 6-3/16 in. square
- 6 in. Square Drain Grates (with Low-Profile Adapters) are available in a variety of colors and materials
- Comes with one 6 in. Square Grate and Low-Profile Adapter
- Works with connected drain pipe to capture and convey excess surface water for proper release downstream
- Place low-profile adapter on top of drain pipe or drain fitting, for a soil-tight fit; place 6 in. drain grate on top of low-profile adapter
- High-density polyethylene (HDPE) using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking
- Use sewer and drain fittings when you need to make turns from the drain grate to drain pipe
- Use with a Pop-Up Drainage Emitter to discharge collected water at a point of release downstream
- Use with a Flo-Well Dry Well System and EZ Drain Gravel-Free French Drain System to detain excess water and slowly release it into the ground
- Onsite stormwater management protects the watershed downstream, and limits excess runoff which can lead to negative impacts such as erosion, pollution, and flooding
- Founded in 1972, NDS is the preferred choice of professionals and the leader in stormwater management with proven products, tools, and support to help you get the job done right