Black inverter Description:
  • 1. Dual LCD digital display enables you to hold the output voltage and battery voltage value at any time.
  • 2. Fault prompt function. In addition to different sound prompts, it can also be displayed more intuitively from the display screen (for example, battery undervoltage, battery overvoltage, overload, high working temperature, output short circuit, etc.).
  • 3. The overload delay closing function is added in the product to solve the sensitive problem of inverter protection when the soluble electrical appliance is started.
  • 4. The small power non professional user market has increased the positive and negative pole return protection function.
  • 5. Intelligent temperature control oil sealing fan. When the inverter is working, it can work at a certain temperature, which is more energy-saving and quieter.
  • 6. Digital MCU control, output wave type, more accurate frequency, accurate output voltage, fast response of protection circuit.
Descriptions:
  • 1.This is a power inverter,using STM-chip technology and kinds of intelligent protection,high reliability.
  • 2.Widely used in cars, steamboats, mobile offering post and telecommunications, public security, emergency and other field.
Specifications:
  • Color:Black / Yellow (Optional)
  • Output waveform:Modified sine wave
  • Input voltage: 12V
  • Input voltage range: 9.5V-15.5V
  • Output voltage: 110V (Optional)
  • Rated power:300W
  • Frequency: 60Hz
  • Inverter efficiency: 0.9
  • Circuit topology: push and encourage type
  • Low voltage protection: with a minimum protection voltage of 9.5V
  • High voltage protection: with a maximum protection voltage of 15.5V
  • Overload protection: Yes
  • Output short circuit protection: Yes
  • Reverse connection protection of positive and negative poles: Yes
  • Output voltage stabilization: Yes
  • Protection buzzer: Yes
  • Circuit topology:Impulse
  • No-load current:≤0.7A
  • USB Interface Output: 5V
  • USB Output Current: 2 x 2.1A
  • Size: 16.5*11.2*5.6cm/6.5x4.4x2.2in
  • Input terminal connection mode: terminal
  • Output interface: international general socket
  • size (mm):161mm/6.28in x 112mm/4.37in x 56mm/2.18in
Note:
  • ①Please Ensure the Rated Power is higher than the electric appliance you wanna apply to. We recommend you buy a larger model than you think you'll need (at least 10% to 20% more than your largest load).
  • ②And if you wanna run several appliance at the same time, you should refer to the total Watt.
  • ③If you wanna run a inductive load for a long time, it`s suggested to buy a pure sine wave inverter.
Package informations:
  • Package Size:187x100x145mm/7.29x3.9x5.66in
  • Package weight:650g/1.43lb
General Box Package
  • Package included:
  • 1 x Power inverter
  • 1 x Alligator clip
  • 1 x Cigarette lighter
Noted:
  • 1.Please allow 1-2mm errors due to manual measurement.
  • 2.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
CAUTION!
  • -1.This is a modified sine wave inverter,NOT applicable for devices which work by built-in motor, hair dryers,air conditioners, coffee machine,water pump, induction cooker,refrigerators and microwave ovens etc.Make sure that the total rated power of the connected devices is ≤ 500W
  • -2.Tighten the Positive (+) and Negative (-) terminals when the car converter is in use
  • -3.If the converter is directly connected with the cigarette lighter. The highest out put power must be under 150W. If higher than 150W,we strongly recommend you using the Crocodile Clips to a battery ,because car cigarette lighter might not afford power over 150W.
  • -4.The car converter suitable for DC12V and Car ONLY, not applied for DC 24V and airplane
  • -5.Please do not leave the inverter in the ON position before car start.It's easy to damage the inverter before connected to the battery.The correct operation is connect to the battery first and then turn on the inverter switch
  • -6.  It's normal for the inverter to become warm while you are using it.In order to get the best using results, please put the inverter on the flat surface The working place should meet the following criteria:
  • 1. Keep dry, should not let the inverter contact the water or other liquids, keep the inverter away from moisture or water.
  • 2. Cool environment, keep the temperature between 0 Celsius degrees and 40 Celsius degrees. Do not put the inverter next to heat vents or other devices. Try to keep the inverter not be shined directly by the sunshine.