48W High Power Brushless Water Pump PWM Speed Regulation 12-24V Built-in Drive Large Flow Impeller Centrifugal Water Pump
Specifications:
The quality of work is very good, the pump back cover and the support of the whole aluminum alloy material, the built-in brushless drive circuit, the default output is only 2 lines, the power is turned, but the power is limited to about 10W, the small power operation is very quiet, the internal motherboard has reserved PWM speed regulation feet, if the PWM speed regulation state the power can be up to 48W, the water is very violent. The pump is estimated to be used for thermal circulation and should be resistant to high temperatures.
Pump power must pay attention to the positive and negative poles, measured voltage 6-24V can work, impeller pump inlet to the impeller is full of water to water, conditions are best installed check valve, or install the lowest position outside the water tank, so that there is water in the state of power will be water, this pump is not filled with glue seal, not suitable for diving, if you need to dive must deal with their own glue seal waterproof, The water pump is strictly prohibited from running idling for a long time without water, and the dry grinding will be abnormal wear.
The pump supports PWM signal speed regulation, the signal level is 5V, the maximum power of 12V is 15W, the maximum power of 24V is 48W, and the high power is best used between the aluminum shell of the back cover and the drive plate.
Each pump weighs about 360 grams.
Note:
1.Due to the light and screen difference, the item's color may be slightly different from the pictures.
2.Please allow 1mm-1cm differences due to manual measurement.
Package Includes:
1x Brushless Water Pump