3in1 design, this product ingeniously integrates digital oscilloscope, multimeter, and signal source functions in device. Equipped with a 2.8-inch IPS display. Multifunctional design, with voltage, current, resistance, capacitance, diode, and continuity test. Built-in waveform signal generator, it can output 7 kinds of waveforms, such as sinewave, squarewave, trianglewave, and so on. Dual channel oscilloscope function, with 10MHz bandwidth and 50MSa/s sampling rate. With perfect trigger function (automatic, , normal). button automatic adjustment will display the measured waveform, support waveform screenshots saving function, and you can export pictures to the computers, convenient for secondary waveform analysis.
Features:
【Premium Material】: ABS+silicone housing material, drop proof and shockproof. The printed circuit board adopts high-cost immersion process, with high antioxidant corrosion resistance, stable working performance and high reliability.
【3In1 Design with IPS Display】: This product ingeniously integrates digital oscilloscope, multimeter, and signal generator functions into device. 2.8-inch color display, screen readings are clearer, and the visual color is richer.
【Signal Generator】: Equipped with a built-in DDS function signal generator, it can output 7 types of function signals, with a maximum output of 2MHz for all signals and a step of 1Hz; The output frequency, amplitude, and duty cycle are adjustable. 7 signal waveforms: sine , squarewave, triangularwave, fullwave, halfwave, noisewave, direct current. Output frequency: 1Hz-2MHz. Output amplitude: 0.1-3.3V Output duty cycle: 0-100%.
【High-precise Multimeter】: Built-in true RMS multimeter, that supports quick software calibration. With /ACvoltage, /ACcurrent, resistance, capacitance, diode, and continuity test. When measuring low voltage /resistance/continuity, the oscilloscope and multimeter functions can be used simultaneously (small window in the upper right corner).
【Digital Oscilloscope Function】: The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, capturing waveform details without loss. With a real- sampling rate of 50MS/s, 10Mhz bandwidth, built-in high-voltage protecting module, maximum support measured voltage of ±400V. Equipped with complete triggering function(automatic, , normal) . Equipped with efficient automatic adjustmem.the measured waveform can be displayed without complicated adjustment. Support saving waveform screenshots, support exporting images to the computers, facilitate secondary waveform analysis.
【Intelligent -burning】: Full-grade overload protections, built-in intelligent -burn chip, and double ceramic fuses, to prevents the misuse of burn meter, safer to use.
【Wide Applications】: It can easily handle measurements in a variety of fields and is widely used in the testing and debugging of electronic circuits, troubleshooting and repairing of electronic elements.
Specifications:
Name: 3in1 Oscilloscope Multimeter
Material: ABS+silicone
Type: standard configuration, high configuration (optional)
: 1 * built-in 3000mAh (included)
Display: 2.8inch color display, 320*240
interface: Type-C 5V, 1A
Oscilloscope:
Real- sample rate: 50Msps
Bandwidth: 10MHz
Storage: 32Kb
Impedance: 1ΜΩ
Base: 5ns-10s
Vertical sensitivity: 20mV/div~10V/div
Peakvoltage: ±40V
Trigger mode: auto/normal/
Trigger type: rise/fall
Display mode: YT/roll
Coupling: Alternating Current / Direct Current
Screenshot: support
Computerized viewing of waveforms: support
Function Signal Generator:
Channel: channel
Frequency: 1Hz-2MHz
Amplitude: 0.1-3.3V
Multimeter:
DCvoltage: 9.999V/99.99V/999.9V, ±(0.5%+3)
AC voltage: 999V/99.99V/750.0V, ±(1%+3)
current: 9999uA/99.99mA/999.9mA/9.999A, ±(1.2%+3)
AC current: 9999uA/99.99mA/999.9mA/9.999A, ±(1.5%+3)
Resistance: 9.999ΜΩ/999.9ΚΩ/99.99ΚΩ/9.999ΚΩ/999.9Ω, ±(0.5%+3); 99 99MΩ, ±(1.5%+3)
Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, ±(2.0%+5); 9.999mF/99.99mF, ±(5.0%+20)
: (-55-1300℃)/(-67-2372°F); ±(2.5%+5)
Diode: support
On/off: support
Fireline detection: support
Item size: 167 * 85 * 34mm / 6.57 * 3.35 * 1.34in
Item weight: 290g / 10.23ounce
Package size: 258 * 130 * 85mm / 10.16 * 5.12 * 3.35in
Package weight:
Standard configuration: 618g / 21.80ounce
High configuration: 694g / 24.48ounce
Packing List(Standard Configuration):
1 * 3in1 Oscilloscope Multimeter
1 * 10X Probe
1 * Clip Probe
1 * Meter Pen
1 * Cable
1 * Guideline
OR
Packing List(High Configuration):
1 * 3in1 Oscilloscope Multimeter
2 * 10X Probe
1 * Clip Probe
1 * Meter Pen
1 * Cable
1 * Guideline
Features:
【Premium Material】: ABS+silicone housing material, drop proof and shockproof. The printed circuit board adopts high-cost immersion process, with high antioxidant corrosion resistance, stable working performance and high reliability.
【3In1 Design with IPS Display】: This product ingeniously integrates digital oscilloscope, multimeter, and signal generator functions into device. 2.8-inch color display, screen readings are clearer, and the visual color is richer.
【Signal Generator】: Equipped with a built-in DDS function signal generator, it can output 7 types of function signals, with a maximum output of 2MHz for all signals and a step of 1Hz; The output frequency, amplitude, and duty cycle are adjustable. 7 signal waveforms: sine , squarewave, triangularwave, fullwave, halfwave, noisewave, direct current. Output frequency: 1Hz-2MHz. Output amplitude: 0.1-3.3V Output duty cycle: 0-100%.
【High-precise Multimeter】: Built-in true RMS multimeter, that supports quick software calibration. With /ACvoltage, /ACcurrent, resistance, capacitance, diode, and continuity test. When measuring low voltage /resistance/continuity, the oscilloscope and multimeter functions can be used simultaneously (small window in the upper right corner).
【Digital Oscilloscope Function】: The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, capturing waveform details without loss. With a real- sampling rate of 50MS/s, 10Mhz bandwidth, built-in high-voltage protecting module, maximum support measured voltage of ±400V. Equipped with complete triggering function(automatic, , normal) . Equipped with efficient automatic adjustmem.the measured waveform can be displayed without complicated adjustment. Support saving waveform screenshots, support exporting images to the computers, facilitate secondary waveform analysis.
【Intelligent -burning】: Full-grade overload protections, built-in intelligent -burn chip, and double ceramic fuses, to prevents the misuse of burn meter, safer to use.
【Wide Applications】: It can easily handle measurements in a variety of fields and is widely used in the testing and debugging of electronic circuits, troubleshooting and repairing of electronic elements.
Specifications:
Name: 3in1 Oscilloscope Multimeter
Material: ABS+silicone
Type: standard configuration, high configuration (optional)
: 1 * built-in 3000mAh (included)
Display: 2.8inch color display, 320*240
interface: Type-C 5V, 1A
Oscilloscope:
Real- sample rate: 50Msps
Bandwidth: 10MHz
Storage: 32Kb
Impedance: 1ΜΩ
Base: 5ns-10s
Vertical sensitivity: 20mV/div~10V/div
Peakvoltage: ±40V
Trigger mode: auto/normal/
Trigger type: rise/fall
Display mode: YT/roll
Coupling: Alternating Current / Direct Current
Screenshot: support
Computerized viewing of waveforms: support
Function Signal Generator:
Channel: channel
Frequency: 1Hz-2MHz
Amplitude: 0.1-3.3V
Multimeter:
DCvoltage: 9.999V/99.99V/999.9V, ±(0.5%+3)
AC voltage: 999V/99.99V/750.0V, ±(1%+3)
current: 9999uA/99.99mA/999.9mA/9.999A, ±(1.2%+3)
AC current: 9999uA/99.99mA/999.9mA/9.999A, ±(1.5%+3)
Resistance: 9.999ΜΩ/999.9ΚΩ/99.99ΚΩ/9.999ΚΩ/999.9Ω, ±(0.5%+3); 99 99MΩ, ±(1.5%+3)
Capacitance: 999.9uF/99.99uF/9.999uF/999.9nF/99.99nF/9.999nF, ±(2.0%+5); 9.999mF/99.99mF, ±(5.0%+20)
: (-55-1300℃)/(-67-2372°F); ±(2.5%+5)
Diode: support
On/off: support
Fireline detection: support
Item size: 167 * 85 * 34mm / 6.57 * 3.35 * 1.34in
Item weight: 290g / 10.23ounce
Package size: 258 * 130 * 85mm / 10.16 * 5.12 * 3.35in
Package weight:
Standard configuration: 618g / 21.80ounce
High configuration: 694g / 24.48ounce
Packing List(Standard Configuration):
1 * 3in1 Oscilloscope Multimeter
1 * 10X Probe
1 * Clip Probe
1 * Meter Pen
1 * Cable
1 * Guideline
OR
Packing List(High Configuration):
1 * 3in1 Oscilloscope Multimeter
2 * 10X Probe
1 * Clip Probe
1 * Meter Pen
1 * Cable
1 * Guideline