Upgrade Soldering Iron Kit:

1. Adding an ON/OFF switch,you can turn the soldering iron on or off. More safer and ease.

2. Made of precision printing technology and the solder kit can be sintered at high temperature and keep a long time use.

3 New design, no electricity on the surface and it's safer to use.Anti-scald nuts can effectively reduce accidents and make your work more handy.

Package also Included:

1 xTemperature Adjust Soldering Iron

1 x switch
1 x plug

5 x Soldering Iron Tips,

1 x Solder Wire

Note:

 

  • Be careful when using the tool in case something unexpected or different happens.
  • The iron heats up quickly, so choose the right temperature.
  • Working at high temperatures for long periods of time may shorten the service life.

 

1

1

1

1

Temperature adjustable from 200 ° C to 450 ° C

There is a wheel on the handle that allows you to set the temperature and select the appropriate temperature.

On / Off switch

The soldering iron is equipped with an approx. 140 cm long power cable.

About 23 cm away from the soldering iron along the cable there is practical on or off switch with which you can quickly switch the device off and on again during work without having to pull the plug from the socket.

4 dissipation holes

With the small vents at the base of the tip holder, it cools down pretty quickly.

Easy to use and replacement of welding tips in 1 minute;

Do not set the highest temperature for a long time during welding to extend the life of the welding tips.

Tips

1. It is important to keep the tip of the soldering iron clean while using it;

2. DO NOT place the soldering iron on a surface, but should place it on a stand after each use or seal it with a heat-resistant cap;

3. The tip of a soldering iron is very hot. Please be sure to wear safety glasses, keep loose clothing and hair out of the way, and be careful with your fingers;

4. Rest every 10 minutes, it's good for your eyes and soldering iron.
 
11

 

1
SREMTCH Soldering Iron Set Specification:

 

  • Power: 60W
  • Operating voltage: 220V Temperature range: 200 ℃ - 450 ℃
  • Switch ON / OFF: Yes Soldering iron stand: plastic
  • Soldering tip model: 900M series Desoldering pump: metal
  • Carrying bag: PU leather

 

Welding tips:

Check to see if the soldering iron cracks are cracked or burned.

Tin the soldering iron after each use to avoid rust formation.

Cleaning the tip while in use enables a better welding result.

Use and clean soldering iron in a well-ventilated place.

Choose the type of tip that is appropriate for the welding job.

  • Perform soldering on the printed circuit board without difficulty;
  • Complete for small electronic or electric vehicles;
  • Electronic component assembly: home appliance repair, printed circuit design, model making ...
 
1

Warning:

It is important to keep the tip of the soldering iron clean while using it;

DO NOT place the soldering iron on a surface, but should place it on a stand after each use or seal it with a heat-resistant cap;

The tip of a soldering iron is very hot. Please be sure to wear safety glasses, keep loose clothing and hair out of the way, and be careful with your fingers;

Rest every 10 minutes, it's good for your eyes and soldering iron.

11

1

1

Electronic student

It is a compact, comprehensive and portable soldering kit for electronic students.

DIY hobbyist

Engineers, beginners to weld and jewelery craftsmen

Appliance repair

Repaire phone, guitar, computer hardware, TV capacitors or other accessories.
 

 

DataCaciques

On 17-May-2024 at 21:07:22 BST, seller added the following information:

DataCaciques