Description:

About Working mode:

[Jog mode]Press the remote control and do not release the line to power on, release the remote control line to disconnect;

[Self-locking mode]Press the remote control line to power on, and press the remote control again to disconnect the line;

[Interlock mode]Press one of the buttons on the remote control (such as the A button), the line is powered on, and then press another button on the remote control (such as the B button) to disconnect;

[Jog delay off mode]Press the remote control line to power on, release the remote control to start timing, and automatically disconnect the line after 5 seconds, 10 seconds, 15 seconds, 20 seconds (4th gear);

[The function of turning on the lights for incoming calls]That is, the whole line automatically pulls in after power is supplied, also known as the function of turning on the lights for incoming calls.

Specifications:

Working voltage: AC 90-250V 50/60Hz

Load current: ≤10A, load power: 1100W

Standby current: 3.6mA～5mA

RF frequency: 433MHz

RF working mode: superheterodyne reception

Receive sensitivity: >97dbm

Remote control receiving distance: more than 50 meters in open space

Decoding method: MCU software decoding;

Modulation method: ASK (anti-interference, strong transmission performance)

The number of remote controllers that can be stored: 20

Support remote control type: intelligent learning type 1527 learning code, 2262 fixed code (customizable rolling code);

Output type: 1-way relay switch signal, with load current less than 10A;

A variety of working modes: jog, self-locking, interlocking, delay off (5 seconds, 10 seconds, 15 seconds, 20 seconds optional), light-on function when incoming calls;

Working environment: -20～80℃.

Color: black, white

Wiring method: fixed terminal

Output wiring type: neutral wire, live wire

Package Included:

1 x 433Mhz Receiver Module，

1 x Feel free to stick the remote control

(optional)

Notes:

Precautions:

1. Do not operate with power on, you should turn off the power first to operate, and use it after the test is confirmed.

2. When the voltage of the remote control is insufficient, please replace the battery in time (when the voltage of the remote control battery is insufficient, the general remote control distance becomes closer).