AEM V2 1 Gallon Water Methanol Injection Kit Multi Input 30-3350
Description
Not CARB legal: Not for sale or street use in CA & CARB states.
null
Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows enthusiasts to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.
The on-demand progressive Multi-Input controller in AEM’s PN 30-3350 Water/Methanol Injection kit for gasoline vehicles features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.
AEM’s engineers spent extensive time developing the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.
The new controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Multi-Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. The controller housing features an easy to access integrated fuse and molded mounting tabs.
AEM’s Multi-Input Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.
Note: Not CARB legal: Not for sale or street use in CA & CARB states.
null
Water/methanol injection for gas engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation on forced induction and high performance naturally aspirated race engines. This allows enthusiasts to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.
The on-demand progressive Multi-Input controller in AEM’s PN 30-3350 Water/Methanol Injection kit for gasoline vehicles features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on both high compression naturally aspirated vehicles (NA) via the MAF/IDC settings and ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. The Multi-Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF.
AEM’s engineers spent extensive time developing the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control.
The new controller design features large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Multi-Input controller has an easy-to-remove plug covering the programming dipswitches and a programming legend on the back for the 0-5v and frequency based settings. The controller housing features an easy to access integrated fuse and molded mounting tabs.
AEM’s Multi-Input Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive.
Note: Not CARB legal: Not for sale or street use in CA & CARB states.
Manufacturer Product Specifications
AEM’s Multi-Input PN 30-3350 gasoline Water/Methanol Injection system’s compact 1 gallon tank includes a high tech conductive low fluid level indicator with a positive lock connector and color matched wires to the wiring harness.
- Multi-Input, 0-5v/frequency-based progressive controller design for use with external MAP sensor for boost or MAF/IDC on high compression NA gas vehicles
- Multi-Input controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test buttons for enhanced splash resistance and mounting tabs
- Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid
- “Boost Safe” failsafe output included (for complete failsafe under all conditions, see Water/Methanol Failsafe Device)
- Internally-bypassed water/methanol injection pump does not cycle on an off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery
- Precision-machined billet-aluminum injector with integral check valve
- Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
- 1 gallon tank(10" x 8.5" x 4.25") with integral conductive low-fluid sensor and positive lock connector (tank-less water/methanol gas systems available, AEM Part #30-3352 includes Multi-Input controller for external MAP/MAF/IDC)
- 20 feet of Nylon injection tubing included
- LED dash light for system status and low fluid warning
Payment
Almost all of our eBay Listings are "Buy it Now" which means payment is due immediately at the time of purchase.
Return Policy: We allow returns of unopened product within 30 days of the purchase date for a money-back refund. If the original packaging is missing or damaged, or if it has been longer than 30 days since you purchased the item, there may be restocking fees incurred. Please message us for a Return Authorization Number before sending anything back to avoid processing delays.
Return Policy: We allow returns of unopened product within 30 days of the purchase date for a money-back refund. If the original packaging is missing or damaged, or if it has been longer than 30 days since you purchased the item, there may be restocking fees incurred. Please message us for a Return Authorization Number before sending anything back to avoid processing delays.
AbouT us
Real Street Performance is unlike most "Race Shops". We are a fully functioning wholesale and retail distribution warehouse in addition to a dyno-equipped tuning and engine building facility. Our sales center and order fulfillment center operates with state of the art, industry leading software that allows us to get you ALL of the parts you need for your build quickly and correctly the first time without the headaches or excuses.
- Best Pricing
- Fast Shipping
- Immediate Response Time
- Experienced in International Export
- 100% Positive Customer Satisfaction Feedback Rating
- Best Pricing
- Fast Shipping
- Immediate Response Time
- Experienced in International Export
- 100% Positive Customer Satisfaction Feedback Rating
Shipping Info
WE CAN ONLY SHIP TO THE ADDRESS ENTERED DURING CHECKOUT.
Most domestic orders ship within 5 days, please allow up to 7-10 days for international orders to ship.
We are very familiar with International Export procedures and we ship out of the country every day. If you are a customer outside of the United States of America, have no worries, we will get your parts to you quickly and correctly, many times just as quickly as our domestic shipments.
Some shipping destinations will require additional shipping, these customers will be contacted immediately after placing their order. Feel free to contact us before placing your purchase for an exact shipping quote.
Import Duties, Taxes and Charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Even though we are based in Florida, not all orders ship complete from our Florida location. Please be aware that some parts will ship directly from other states to your location. Please message us before clicking buy-now to check location availability if this is a concern of yours.
PLEASE NOTE, ORDERS TO THE FOLLOWING COUNTRIES WILL BE SHIPPED VIA USPS INTERNATIONAL TO AVOID DELAYS AND COMPLICATIONS, UNLESS SPECIFICALLY REQUESTED BY THE BUYER TO SHIP VIA UPS:
- Russia
- Brazil
- Greece
Most domestic orders ship within 5 days, please allow up to 7-10 days for international orders to ship.
We are very familiar with International Export procedures and we ship out of the country every day. If you are a customer outside of the United States of America, have no worries, we will get your parts to you quickly and correctly, many times just as quickly as our domestic shipments.
Some shipping destinations will require additional shipping, these customers will be contacted immediately after placing their order. Feel free to contact us before placing your purchase for an exact shipping quote.
Import Duties, Taxes and Charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Even though we are based in Florida, not all orders ship complete from our Florida location. Please be aware that some parts will ship directly from other states to your location. Please message us before clicking buy-now to check location availability if this is a concern of yours.
PLEASE NOTE, ORDERS TO THE FOLLOWING COUNTRIES WILL BE SHIPPED VIA USPS INTERNATIONAL TO AVOID DELAYS AND COMPLICATIONS, UNLESS SPECIFICALLY REQUESTED BY THE BUYER TO SHIP VIA UPS:
- Russia
- Brazil
- Greece
Our Services
20,000 sqft Facility in Sanford, FL Our new facility is located in sunny Sanford Florida, but we ship all over the world every day with the most competitive rates.
Contact us
Our goal is to respond to your questions as quickly as possible. We are a real shop full of real people ready to help you every day. We are not some dorm room drop shipper. We are here to help.
Real Street Performance eBay About Me Page
