These adapters work with the X2208, X2212, and X2216 motors. 

These are also compatible with the Small Parts CNC 6mm spinner nut set. 

These will also work with the DJI self threading props.
Each of our Sunnysky X22 Prop Adapter Sets are CNC machined from billet aluminum.  These adapters have a 6mm shaft and will bolt on to the popular Sunnysky X2208, X2212, and X2216 brushless motors used in many multirotor applications.

This adapter set includes 2 right hand thread (CW) and 2 left hand thread (CCW) adapters.  They will allow a large variety of plastic, carbon fiber and DJI self tightening propellers to be used on these motors.    Each propeller will be self tightening while the motor is powered.

The adapters are very light and strong giving you the confidence needed for worry free flying. 

Installation is quick and simple with no modifications necessary.  The left hand thread (CCW) adapters have a small circle engraved on the top of the shaft.
 

Two step installation:

1. Install prop adapter onto motor using the supplied socket head screws.
    
2. Install propeller onto adapter followed by the M6 washer and tighten with the M6 Hex Nut.
   

Included:  4 - Sunnysky X22 Prop Adapters (2 right hand thread / 2 left hand thread)
              12 - M2 x 5mm socket head screws, 1 - allen wrench
              2 - M6 right hand thread hex nuts, 2 - M6 left hand thread hex nuts, 4 - M6 Flat Washers
 

Weight (single prop adapter only):  2.9g
 

Dimensions:

• Shaft Diameter:  6mm
• Shaft Thread:  M6x1.0  (2 right hand thread and 2 left hand thread)
• Shaft Length:  15.2mm
• Base Thickness:  5.1mm
   

Notes:

When replacing props it is recommended to check the current (amp) draw with a watt meter so the motor or ESC amperage rating is not exceeded.

Adapter screws should be checked and tightened as necessary.  A drop of blue (removable) loctite can be applied to the 12 screws before installing the adapter.

These are not compatible with the Sunnysky X2204 and X2206 motors.

Motor and props not included.