BAE AUDIO - 312A

Le 312A est un préampli basé sur le circuit (ampli op.) Avedis 1122™, équivalent au 2520 utilisé dans les préamplis API, et sur des transfos d'entrée et de sortie Jensen. Il a une super "patate" alliée à une superbe réponse dans les graves et des aigus clairs avec beaucoup "d'air". Le son produit vous arrive vraiment "dans la figure" car les transitoires ne sont pas du tout compressés. Le rendu des basses fréquences est particulièrement "punchy".

Les 312A sont construits en plusieurs versions : 2 versions rackables, une mono et une stéréo (ci-dessus) et une version verticale modulaire (photo ci-contre). Les versions rackables sont accompagnées d'une alimentation surdimensionnée qui permet un fonctionnement des préamplis au meilleur de leur possibilité.

La version modulaire du 312A peut être inséré dans des "lunchbox" ou racks API. Il existe également une lunchbox à 6 slots (photo ci-dessous) et un rack à 11 slots fabriqué par Brent Averill qui peuvent non seulement recevoir les 312A mais également les modules API vintage (comme le 550A) !

Depuis peu, un rack à 2 slots alimenté (R52 Avedis) est également disponible (sur demande). Il est idéal pour coupler le 312A à un EQ E27 par exemple ou à un 525 API.

Les 312A sont absolument fantastiques pour les percussions et les batteries. Ils sont à un prix très abordables. Beaucoup de gens se font des racks de 6 ou de 11 pour couvrir l'ensemble d'un kit de batterie !

BAE AUDIO - 312A

The 312A is available as a 500 series module or a single or dual channel 19" rackmount.

Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.

Made with the highest quality parts including Jensen input and output transformers and the Avedis® 1122 opamp. The 312A also includes a high impedance DI for instruments.
Made using Avedis® 1122 opamps
Supplied with Jensen input and output transformers.
Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.

• Switches have gold contacts for long life.
• XLR connectors on the back for mic input and output and phone jack in front for direct input.
• High impedance direct input for guitar and synthesizer.
• Separate front panel switches for phantom power.

Specifications :

• Frequency Response 5Hz to 75kHz (-3dB)
• Mic Input Impedance ?1400 ohms
• Line Input Impedance 10k ohms
• DI Input Impedance ?250k ohms
• Output Impedance 75 ohms
• Common Mode Rejection Ratio 110dB min @ 60Hz
• Maximum Output Level +27.1 dBu @ 600?
• Power Requirements 115/230 VAC, 27W (Rackmount) 40mA per Rail (Module)
• Gain dB 10 to 66 dB
• Equivalent Input Noise -120 dBu; Unweighted 300kHz Bandwidth

BAE AUDIO - 312A

The 312A is available as a 500 series module or a single or dual channel 19" rackmount.

Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.

Made with the highest quality parts including Jensen input and output transformers and the Avedis® 1122 opamp. The 312A also includes a high impedance DI for instruments.
Made using Avedis® 1122 opamps
Supplied with Jensen input and output transformers.
Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.

• Switches have gold contacts for long life.
• XLR connectors on the back for mic input and output and phone jack in front for direct input.
• High impedance direct input for guitar and synthesizer.
• Separate front panel switches for phantom power.

Specifications :

• Frequency Response 5Hz to 75kHz (-3dB)
• Mic Input Impedance ?1400 ohms
• Line Input Impedance 10k ohms
• DI Input Impedance ?250k ohms
• Output Impedance 75 ohms
• Common Mode Rejection Ratio 110dB min @ 60Hz
• Maximum Output Level +27.1 dBu @ 600?
• Power Requirements 115/230 VAC, 27W (Rackmount) 40mA per Rail (Module)
• Gain dB 10 to 66 dB
• Equivalent Input Noise -120 dBu; Unweighted 300kHz Bandwidth

BAE AUDIO - 312A

The 312A is available as a 500 series module or a single or dual channel 19" rackmount.

Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.

Made with the highest quality parts including Jensen input and output transformers and the Avedis® 1122 opamp. The 312A also includes a high impedance DI for instruments.
Made using Avedis® 1122 opamps
Supplied with Jensen input and output transformers.
Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.

• Switches have gold contacts for long life.
• XLR connectors on the back for mic input and output and phone jack in front for direct input.
• High impedance direct input for guitar and synthesizer.
• Separate front panel switches for phantom power.

Specifications :

• Frequency Response 5Hz to 75kHz (-3dB)
• Mic Input Impedance ?1400 ohms
• Line Input Impedance 10k ohms
• DI Input Impedance ?250k ohms
• Output Impedance 75 ohms
• Common Mode Rejection Ratio 110dB min @ 60Hz
• Maximum Output Level +27.1 dBu @ 600?
• Power Requirements 115/230 VAC, 27W (Rackmount) 40mA per Rail (Module)
• Gain dB 10 to 66 dB
• Equivalent Input Noise -120 dBu; Unweighted 300kHz Bandwidth

BAE AUDIO - 312A

The 312A is available as a 500 series module or a single or dual channel 19" rackmount.

Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.

Made with the highest quality parts including Jensen input and output transformers and the Avedis® 1122 opamp. The 312A also includes a high impedance DI for instruments.
Made using Avedis® 1122 opamps
Supplied with Jensen input and output transformers.
Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.

• Switches have gold contacts for long life.
• XLR connectors on the back for mic input and output and phone jack in front for direct input.
• High impedance direct input for guitar and synthesizer.
• Separate front panel switches for phantom power.

Specifications :

• Frequency Response 5Hz to 75kHz (-3dB)
• Mic Input Impedance ?1400 ohms
• Line Input Impedance 10k ohms
• DI Input Impedance ?250k ohms
• Output Impedance 75 ohms
• Common Mode Rejection Ratio 110dB min @ 60Hz
• Maximum Output Level +27.1 dBu @ 600?
• Power Requirements 115/230 VAC, 27W (Rackmount) 40mA per Rail (Module)
• Gain dB 10 to 66 dB
• Equivalent Input Noise -120 dBu; Unweighted 300kHz Bandwidth