The Lumenier TX5GPro Mini 25mW 5.8GHz 32CH FPV video transmitter is the perfect VTX for FPV racing. The new Pro series of transmitters feature a RF toggle switch, meaning you can power on your aircraft without broadcasting your FPV signal. Now you can get the benefit of an easy to use press button transmitter combined with the peace of mind that you won't interfere with other FPV signals when powering on your aircraft while on the ground! To start the RF transmission simply power your TX and then press and hold the function button for 2 seconds. A green LED will indicate that the TX transmitter is actively broadcasting. In addition the Pro series includes a new and upgraded on-board 5v regulator. This new regulator can handle the high current spikes generated by newer ESCs that have aggressive braking enabled.
The lower 25mW transmission power means more pilots can fly together without overpowering each other on close frequencies. The TX5GPro has 32 channels including the new Raceband frequencies. Our friends from ImmersionRC first divided the 5.8 band into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Lumenier Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an on-board microphone to transmit audio to your receiver.
The TX5GPro features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 7.5g!
Frequency and channel table:
Band | Channels | ||||||||
CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | ||
Band 1 | FS / IRC | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
Band 2 | Lumenier / DJI | 5705 | 5685 | 5665 | 5752 | 5885 | 5905 | 5925 | 5866 |
Band 3 | Bosecam A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
Band 4 | Raceband | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
Compatible with Fatshark, ImmersionRC, Boscam, Foxtech and other generic branded FPV receivers within the same frequency range.
*Note: TX antenna must be installed properly before it is
switched on, power on without install antenna, or a improper antenna was
used may easily burn the TX, and such damage is not covered by
warranty. Mount the VTX in an area with good air cooling.
The use and operation of this type of product in the USA and many other
countries may require a license and some countries may forbid its use
entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses. It
is your responsibility to ensure that the use of this product meets the
requirements imposed by your government’s rules and regulations for RF
devices. Do not purchase this product if you are unsure of the
government requirements or are not able to comply with them. VRC Hobbies Inc. cannot be held responsible for your actions if you purchase and/or use
this product in violation of your government's regulations. By agreeing
to our terms and conditions during the check-out process, you also agree
to have read and to understand this notice.