Usage method:
"Heater" must be adjusted to the minimum before use, "air" has wind output
1. Turn on the power switch
2. Adjust the air volume. Guarantee wind
output before beginning to use (in the direction of arrow "-" "+")
3. Adjust the temperature "heater" (in the direction of arrow "-" "+")
Adjust the temperature to let the temperature slowly warming
4.The higher the air volume，the more slowly the temperature rise, maintaining the
temperature at 450 or less, or easy to damage the hot air gun heating wire.

Close hot air gun
Be sure to follow the following before closing the hot air gun
1. Adjust the temperature "heater" to the minimum gear
2. Adjust the air volume "air" to the maximum position
3. Hold on for 30 seconds,or wait for the temperature display to fall to 150 degrees Celsius,than you can turn off the turn off the power

Note:
1. The hot air gun temperature should not exceed 450 ℃, otherwise might easily damage or affect
the service life of hot air gun
2. Be sure to cool off before a hot air gun is turned off.
3. Metal drums built with friable insulation materials, please handle with care, never fall heavy shock.

Feature:
Temperature controlled hot air gun
LCD display hot air temperature
Constant temperature and air flow
Temperature and air speed stepless adjustment in a large scale
Portable and space saving with compact size
Ideal for soldering removing tin from surface of parts, such as SOIC, CHIP,PLCC,BGA etc. no damage

Specifications:
Model:GJ8018LCD
Working Voltage:AC 220V
Working Current:2.5A
Power:450W
Max. Hot Air Temperature:450℃
Hot Air Gun Size:285x50mm(LxD)

Package included:
1X Hot Air Gun
1X Bracket
1X English Instruction Manual
1X Colorful Package
4X Nozzle