Briwax Wax Original Polish Tudor Oak 400g The Natural Wax Cleans and Polishes
Briwax Original Wax Polish offers the simplest of finishes to unfinished / raw timber or the final touch to a full French polished surface whether in the home or the workshop. A blend of Beeswax and Carnauba waxes give an instant natural sheen to bare wood or wood prepared with Shellac Sanding Sealer. Ideal for woodcarvings and turned wood, for floors and skirtings. Briwax cleans and protects wood, metalwork and even melamine.
Produces the Briwax finish on finished and unfinished timber.
Intended Use: Provides a natural sheen to sealed wood. Used for restoration of antique furniture. Always check compatibility with antique furniture and pre-finished furniture.
Formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine.
Colour: Tudor Oak
Size: 400g
How to Use Briwax Original Furniture Wax
Video will open in a new window
Using the eBay App? Paste link into a browser window:
Preparation: The surface must be clean and dry. Briwax Original Polish can be used on previously waxed surfaces. For best results initially clean the surface with Briwax Wax Polish Remover.
Application: Apply to the surface with a soft lint free cloth or 0000 Briwax Steel Wool working with the grain. Once dry, buff with lint free cotton cloth to achieve the desired finish.
Coats: One coat is usually sufficient but a second coat may be applied to obtain a higher sheen.
Drying Time: Quick drying.
Re-coating Time: Re-apply if required after a few minutes.
Application Temp: Ideally 15-25° C
Maintenance: Re-apply when necessary.
Compatibility: Compatible with all types of timber finishes. For best results and to prevent a blotchy appearance timber should always be previously sealed with a varnish, oil or Briwax Shellac Sanding Sealer. The product is not designed for use in areas where it will come into contact with water.
Clean-Up: Hands and application cloth can be cleaned in warm soapy water.