Product Videos:Video 1 

STOCK# - ARAD81RL MFG# - ARAD81**
New and unused. In the original manufacturer packaging. This ships FREE within the U.S. when using ground service. If ordering it you may add more items to your order without incurring any shipping charges if shipped within the U.S. using ground service.

This is the Electric Powered 2.4GHz Radio Controlled 1/8th scale
Ready to Run Kraton 6S BLX Speed Truck from ARRMA.


Features

Chassis: 0.12 (3mm) thick aluminum black in color
Drive: Four wheel with CVD driveshafts
Radio: Tactic TTX300 2.4GHz 2-channel with ADS-15M waterproof
steering servo 208oz/in (15kg/cm) torque
Motor: Motor: BLX4074 2050Kv 4-pole brushless (ARAG2000)
ESC: Waterproof BLX185 150A 6S with built-in cooling fan and male
XT90 connector
Shocks: 16mm red anodized aluminum body oil filled
Shock Towers: 0.20 (5mm) thick aluminum black in color
Suspension: Pivot ball with anti-roll bar
Differentials: Three metal gear
Roll Cage: Composite internal
Body: Trimmed and painted polycarbonate nylon rear wing
Motor Mount: Aluminum
Battery Holder: Adjustable hook and loop straps holds two 2S or
two 3S LiPo cells
Tires: dBoots Minokawa width: 3.3 (85mm) diameter: 6.2 (157mm)
Wheels: Five split spoke black in color 17mm hex diameter: 3.8
(97mm) width 2.6 (66mm)
Camber: Adjustable front and rear camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Caster: Adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Warranty: Two year limited warranty beginning at date of purchase


Includes

RTR Kraton 6S BLX Speed Truck with Painted Body 2.4GHz Radio
Waterproof Steering Servo and Receiver Box BLX185 ESC 2050Kv
Brushless Motor 12T Pinion Gear Instruction Manual. two XT90
Battery Connectors and Bridging Wire for single pack use


Requirements

AA Batteries: Four for transmitter
LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90
connector Duratrax 11.1V 5000mAh 35C batteries
recommended or one 4-6S LiPo battery
Battery Charger: To match selected battery
LiPo charging sack building & track equipment


Specifications

Vehicle-
_ Length: 24 in (590mm)
Width: 18.5 in (470mm)
Height: 7.5 in (195mm)
Wheelbase:14.9 (378mm)
Ground Clearance: 1.3 in (33mm)
Weight: 9.15lb (4.5kg)
Maximum Battery Tray Dimensions: 6.2 x 2.0 x 1.8 (158 x 51 x 46mm)
Body-
Length: 18.6 (472mm)
Width: 8 (203mm) behind front wheels narrowest point
Width: 10.03 (255mm) at rear wheels widest point
Height: 6.25 (159mm)


Comments

Available in the following body color schemes;
Green and Black ARAD81GL
Red and Black ARAD81RL


Comments

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 15x21mm F&R Inner Hubs 1 ARAC3162
2 8x16mm F&R Inner Hubs 1 ARAC3156
2 5x10mm Idler Gear 1 ARAC3200
2 5x10mm Input Shaft 1 ARAC3200
2 10x15mm Diff Gear 1 ARAC3202
6 8x16mm Fr Ctr & R Diffs 3 ARAC3156


The BLX185 ESC was set from factory to default to a LiPo battery
mode.
If any adjustments such as recalibration were made check to see
that the battery mode has not been inadvertently set to NiMH mode.
Follow these steps to verify battery mode;
1. Raise the vehicle chassis so that the wheels are not touching
anything.
2. With the battery or batteries charged and connected to the
vehicle s ESC leads switch on the transmitter and then switch
on the vehicle. If a green LED flashes once the ESC is in LiPo
mode. If there is no LED flash on the ESC and a pulsing noise
is made by the motor the ESC is in NiMH mode. If you intend to
use LiPo batteries DO NOT operate ESC in NiMH mode the
batteries may be damaged.


To switch ESC from NiMH mode to LiPo mode perform the following
steps;
1. Connect battery switch on transmitter press and hold set
button and turn on ESC. The red LED will flash.
2. Keep holding set button until green LED flashes. The number of
flashes represents the variable number of attributes being
programmed.
3. To enter the battery mode programming function release the set
button when one green LED flashes.
4. Press the set button to change battery mode between LiPo and
NiMH. One RED LED flash indicates ESC is set to LiPo mode.
5. To save setting switch ESC off.


ajw 1-30-14
jAM 11/03/15
ir/jxs
updt jxs 04/03/17

 Accessories currently listed within our eBay store required to complete this item:
 Basic —
ARRMA Charge Lead 4mm Plugs to XT90 Male
Duratrax Onyx LiPo 3S 11.1V 5400mAh 50C Soft Case XT90
Duratrax Onyx 245 AC/DC Dual Balancing Charger
Duratrax Onyx AA Alkaline Battery (4)
Other accessories may be required. Please read the above notes.


Payments – PAYPAL IS THE ONLY PAYMENT WE ACCEPT.

International Buyers Only – Please allow 2 to 4 weeks for international deliveries. Not all international packages are shipped with tracking information. Please Note: Duties and taxes are not included in the item price or shipping charges. Please check with your local customs office prior to buying. These will be added by your local authorities upon delivery - do not confuse them for additional shipping charges. We are unable to falsify the value of the shipment because that would be illegal.

Feedback Ratings – Please contact us first if you feel that you cannot give us ratings of 5 in all categories. We make overall customer satisfaction our #1 priority and would appreciate the opportunity to earn a 5 rating.