New-Old-Stock (NOS) Shimano 600 Brake Levers (Non-Aero Design)...Model BL-6200 Thank you for your interest in this item and please visit our store for other offerings. We have very reasonable shipping terms and combine orders to save money (for customers) on shipping costs. We also maintain customer friendly return/refund/exchange policies. |
Product Description: This offering is for a set of new-old-stock Shimano 600 brake levers (Model BL-6200) in the non-aero design (which means the brake cables will "exit" through the top of the levers, as opposed to being wrapped under the bar tape...as is so common with today's road bikes). These are the very late 70's / early 80's Shimano 600 drilled levers with factory matched rubber hoods that are a natural gum rubber (brown) color. We should also mention this model lever appears to be Shimano's original (or first generation) brake lever offering in it's 600/Ultegra product line...or possibly the first model that was commercially marketed/manufactured for the retail market. Regardless, it's a small piece of Shimano history that dates back 40+ years (while still remaining connected to one of the higher quality component groupsets in today's marketplace). Please also note this offering does include oversized, non-aero cable housing stops...which are needed to deal with the cable opening at the top of each brake lever (and underneath the rubber hood) that measures about 8 mm in diameter. These oversized cable housing stops are still a relatively inexpensive spare part to acquire, but please understand you will need them for all Shimano 600 non-aero (Model BL-62XX) series levers. On this same topic, we want to clarify that when we say "cable housing stops" we are not referring to the newer ferrules that are common today, which are typically the same diameter as the cable housing. Many of today's newer levers have built-in cable housing stops, so smaller ferrules are all that is needed. However, for many of these old stock brake levers (these levers included), a separate oversized cable housing stop is required that will slip over the cable housing. This oversized design is necessary, because it will "flare-out" at the end to provide a platform that rests on top of vintage brake levers (and underneath the rubber hoods). The small lot of these brake levers were bulk packed, so please expect some minor shopwear with these sets...but functionally the sets are fine and the gum rubber hoods are still surprisingly soft and pliable (especially when considering they appear to be an original factory match to the levers). Listing Update...We have sold through most of our stocks in these levers, so we have begun updating the pictures for the next set that will sell/ship. To this end, I can confirm this next set shows fairly well. Please also note that while we have multiple quantities listed for sale, we will repeatedly update the pictures to reflect the next offering that will sell/ship.
Terms and Conditions: You may visit our store by clicking on this "Store Home Page" link and please note the product categories on the left side of our "Store Home Page". We have also moved our "Terms and Conditions" to a separate page within our Ebay store. You may navigate to this page by clicking on the link on the left side of our "Store Home Page" (below the product categories) or you may click on one of our "Terms and Conditions" direct links herein. Note to international customers regarding shipping... Note to international customers regarding customs... |