2.5''  SATA Hard Drive HDD SSD Adapter Connector to IDE 44 Pin Cable Interposer Connector

Feature Compliance:
 

• Serial ATA 1.0 Specification compliant
   
• Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
   
• ATA/ATAPI PIO mode 0 to 4
   
• ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
   
• ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
   
• Support Serial ATA hot-plug
   
• Ultra low power consumption
   
• Work for both AC and DC couple between the transmitter and the receiver
   
• Provide specified OOB signal detection and transmission
   
• Support Spread Spectrum Clocking to reduce EMI
   
• Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
   
• Support Partial/Slumber power management
   
• Provide adjustable TX signal amplitude and pre-emphasis level
   
• Master IDE Device support

Dimension 69 x 14 x 17.5 mm (L x W xH)

 

What you will get:

1pcs X HDD adapter only.

 

Notice: It is mainly used in desktop and server, if you want to use for your laptop second caddy, before you bid it, please check  your laptop caddy first.