Product Code: SGK-R78-4-C

 
 
Product Code: SGK-R78-4-C
 
This is a complete sliding gate hardware installation kit with all the the parts required for a 4m sliding gate with Cladding. This kit is suitable for sliding gates with uneven surfaces for example gates with pickets or colourbond on the face of the gate.
 
Floor Track
8 x 1m fully galvanized heavy duty floor track.

This 1m gate track is heavy duty 3mm thick.
Wheels
2 x 78mm Recess mounted heavy duty wheels with dual bearings.
The wheels are fitted into the the underside of the bottom gate frame, the wheel will raise the gate by aprox 27mm from the sliding gate track.
U Guide
1 x 70mm U Guide Gate Keeper.

This "U" Guide-stop is suitable for gates up to 70mm thick.
The "U" Guide is installed at the closing end of the sliding gate.

Gate stop
1 x 115mm Gate Stop.

Heavy duty anodized metal with rubber end for the open position.

Sliding Gate Block with "C" Channel
1 x Nylon Block
1 x "C" Channel

This Nylon gate block and "C" channel is suitable for gates with uneven surfaces, for example: gates with pickets. The "C" channel is attached to the post and the nylon block fits into the "C" channel and to the "Z" channel which is mounted to the top of the sliding gate.

"Z" Channel
4 x 1m Aluminium "Z" Section for Sliding Gates.

This Aluminium "Z" Section is the ideal choice for gates:
- With an incline or decline (not on level ground)
- With pickets or cladding on the face of gate making an uneven surface on the gate
- With spears at the top of the gate
- With an arched top design
 
Example of how the Z Section works when installed with Block & "C" Channel
 
 
The following images illustrate situations when the sliding gates used are not the standard shape and the Z Section is useful
 

Example: Sliding Gate with Timber Cladding
A sliding gate with Timber Cladding on the face of the gate makes it difficult to use the roller and bracket set due to the uneven surface on the face of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.


Example: Sliding Gate with Colorbond Cladding
A sliding gate with Colorbond Cladding makes it difficult to use the roller and bracket set due to the uneven surface on the face of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.

Example: Sliding Gate with Spear Top
A sliding gate with spears at the top makes it difficult to use the roller and bracket set due to the gap between the top of the flat part of the gate and the top of the spears, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.

Example: Sliding Gate with Arched Top
A sliding gate with an arched top makes it difficult to use the roller and bracket set due to the top of the gate being different heights at different points of the gate, the block and "c" channel along with the z section are the correct guiding system to use in this scenario.