|
( PICTURE SHOWS 1 LTR FOR REFERENCE ONLY YOU WILL RECIVE SIZE / VOLUME AS SELECTED )
ISO 68 Machine Slideway Oil ( produced In UK by Millers Oils Brighouse )
selection of sizes from 1ltr or 5 ltr please select size required from drop down menu above
High performance slideway oil for machine tools with excellent demulsification properties
The quality of machined components depends heavily on the accurate feed and accurate positioning provided by machine tool slideways with slideway oils playing an important role. Slideway oils must provide a stable, adhesive lubricating film in the presence of metalworking fluids even in micro-feed situations and when pressures are high. Good lubrication eliminates chattering and thus ripples on the surface of components caused by stick-slip. To reduce the power consumption during slideway start-ups and feed situations, special attention must be paid to the lubricant between the sliding elements. Important parameters for the selection of the most suitable slideway oil are the cutting fluid, the slideway materials and the geometry of the lubrication grooves. The lubrication intervals must be matched to the machining operation and the design of the machine.
• Stable lubricating film.
• Low coefficient of friction.
• Avoidance of stick-slip.
• Good EP properties and
excellent protection against
wear.
• Excellent corrosion protection
(steel and non-ferrous metals).
• Good demulsification, optimum
compatibility with watermiscible cutting fluids.
• Excellent compatibility with
plastic materials (slideway
materials).
• No discoloration of the slideway
material.
I have had several emails asking about this in comparison to the Vactra range, this is a oil number range with each number associated with a viscosity details are bellow Mobil vactra 1 = ISO 32 Mobil Vactra 2 = ISO 68 Mobil vactra 3 = ISO 150 Mobil vactra 4 = ISO 220
|