Type: Modified alkyd resin with anti-corrosive additives
Intended Use: An anti-rust primer that is used to stop further corrosion and allow a paintable surface after drying, on most metals, including automotive use.
Special Features: Low viscosity material that can be used in a spray gun without thinning and high penetration for superior corrosion protection
Coverage: 7m² per Litre
Preparation: Expose the rusted area fully, to effectively tackle the corrosion from spreading further and remove any oils or grease from the area. Repair any dents, holes before application.
Application: Can be applied with a brush, roller or spray gun. The material does not need the use of thinners, due to its low viscosity, use cellulose thinners to thin product.
Coats: 2 coats maximum
Drying Time: 4 hours
Re-coating Time: The second coat can be applied straight after the first coat is touch dry
Application Temp: Can be applied in poor weather conditions, high humidity and temperatures down to 0°C
Compatibility: Compatible under most synthetic, household, cellulose, enamel, oil-based, and two component paints, but check suitability before use.
Settlement: Stir well before use for any possibility of settlement
Clean Up: All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard.
Shelf-life/Storage: 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C
Hazards: Flammable. Keep out of reach of children. Use only in well ventilated areas. Keep away from sources of ignition – no smoking. Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. Do not use White Spirit.