This item cannot be shipped or sold to California.
3 Lobe. Required: Alpha Series Valve Springs & Titanium Retainers 344-05-1410, header, and Engine Management.
22-25hp Gains. This cam provides larger gains when there is more compression in the combustion chamber than what came factory. We recommend using this cam on all motor K-series engines with higher-than-stock compression pistons, and/or boosted engines. This cam provides a 22-25hp gain over factory, and requires upgraded valvesprings and retainers to avoid engine part failure.
Note: 3 Lobe. Required: Alpha Series Valve Springs & Titanium Retainers 344-05-1410, header, and Engine Management.
Car Make: Acura Honda
Car Model: RSX Type S / Civic SI / TSX
Years: 02-06 RSX S / 06-11 Civic Si / 04-08 TSX
Engine: K20A2 K20Z1 K20Z3 K24A2
Cam Duration: 272/276
Cam Lift: .535"/.496" (13.58mm/12.59mm)
Fitment:
Acura K20A2, Z1
Acura K24A2
Honda K20Z3
Note:
Required:Â Skunk2 Alpha Series Valve Springs, Titanium Retainers, header, Engine Management.
Camshafts Specifications:
Intake - Lift: 13.58mm/ Duration 272°
Exhaust - Lift: 12.59mm/ Duration 276°
Intake Centerline: Variable*
Exhaust Centerline: 107° BTDC
Valve Clearance (Intake / Exhaust): .008� / .010�
RPM Range: 1,500 - 8,800 rpm
HP Gains:Â 22-25 hp
Torque Gains: 18-20lb-ft
*iVTEC settings: small lobe, 35° advance; big lobe, 40° initial taper to 30° advance. VTEC crossover: 5,500 - 6,500 rpm.
Gain an extra 22-25 hp and retain your factory idle and low-speed emissions with Skunk2’s Series Stage 2 Camshafts, our premier line of high-performance camshafts for Honda’s K20A2-based, K-series engines. Series Stage 2 Camshafts are designed to optimize horsepower and torque on engines featuring free-flowing intake and exhaust tracts, increased compression, and upgraded valvetrain and are the result of Skunk2’s years’ worth of drag racing and road racing efforts. No other line of high-performance camshafts even comes close to Skunk2’s Series.
Skunk2 camshafts deliver unparalleled power as a result of continual, extensive development and testing. By utilizing advanced manufacturing techniques and the latest computerized simulation and modeling equipment, Skunk2 camshafts are able to deliver maximum power across the entire powerband. Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance. Each camshaft is manufactured from high-strength, hollow, iron-alloy cores featuring cutting-edge profiles that emphasize an exceptional idle and low emissions. All Skunk2 camshafts are ground to exact specifications using state-of-the-art CNC cam grinding machines equipped with cubic-boron grinding wheels and feature hardened, wear-resistant lobes and surfaces.
Skunk2’s Series Camshafts for K20A2-based, K-series engines also feature Fast Ramp and AMAX profile technology, which increases overall performance and results in unmatched response from idle to redline. AMAX technology simply maximizes the area under the lift curve but without compromising reliability or valvetrain stability. Skunk2’s profiles feature more duration than competitors’ at lifts above 1mm, resulting in greater efficiency and more power. And thanks to Fast Ramp, the same technology used in Formula One racing, seat timing is reduced, which results in additional cylinder pressure and more torque but without compromising valvetrain longevity.
Skunk2 camshafts designs are the direct result of our years of drag racing and road racing efforts. In addition to each Skunk2 project car and race vehicle, the world’s top road racing and drag racing teams have relied on Skunk2 camshafts for years.
Return Policy: We allow returns of unopened product within 30 days of the purchase date for a money-back refund. If the original packaging is missing or damaged, or if it has been longer than 30 days since you purchased the item, there may be restocking fees incurred. Please message us for a Return Authorization Number before sending anything back to avoid processing delays.
- Best Pricing
- Fast Shipping
- Immediate Response Time
- Experienced in International Export
- 100% Positive Customer Satisfaction Feedback Rating
Most domestic orders ship within 5 days, please allow up to 7-10 days for international orders to ship.
We are very familiar with International Export procedures and we ship out of the country every day. If you are a customer outside of the United States of America, have no worries, we will get your parts to you quickly and correctly, many times just as quickly as our domestic shipments.
Some shipping destinations will require additional shipping, these customers will be contacted immediately after placing their order. Feel free to contact us before placing your purchase for an exact shipping quote.
Import Duties, Taxes, and Charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
Quoted shipping does not include insurance. If you would like to add insurance to your contact us here to go over the options.
Please note that eBay requires all orders $750.00 and above to have Signature confirmation, so if your package total is $750.00 or more, your shipment will require a signature.
Even though we are based in Florida, not all orders ship complete from our Florida location. Please be aware that some parts will ship directly from other states to your location. Please message us before clicking buy-now to check location availability if this is a concern of yours.
PLEASE NOTE, ORDERS TO THE FOLLOWING COUNTRIES WILL BE SHIPPED VIA USPS INTERNATIONAL TO AVOID DELAYS AND COMPLICATIONS, UNLESS SPECIFICALLY REQUESTED BY THE BUYER TO SHIP VIA UPS:
- Russia
- Brazil
- Greece
20,000 sqft Facility in Sanford, FL Our new facility is located in sunny Sanford Florida, but we ship all over the world every day with the most competitive rates.
