•  
  • Fitment:
  •  Works on All models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), such as Audi, Chrysler, Dodge, Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo and so on.
  •  
  • Features:  
  • 1. Made of high quality steel for durability and perfect match, hold the camshaft stationary during removal and installation of sprocket retaining nuts and bolts.  
  • 2. Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc., also works on diesel injection pump or water pump.  

    • Camshaft Diesel Injection Pump Cam Pulley Sprocket Holding Tool for Honda Toyota

     

    Fitment:


    Works on All models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), such as Audi, Chrysler, Dodge, Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo and so on.

     

    Features:
     

    1. Made of high quality steel for durability and perfect match, hold the camshaft stationary during removal and installation of sprocket retaining nuts and bolts.
     

    2. Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc., also works on diesel injection pump or water pump.
     

    3. Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.
     

    4. With this tool, no more jamming screw drivers through cogs to hold camshaft sprockets or or camshaft gears in place.
     

    5. Detent grooves on holding pins gives user a sure hold to use as a counter holder when loosening or tightening sprocket retainer bolts.
     

    6. Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts, all metal design with non-slip rubber grip.
     

    7. All models with sprocket holes larger than 12mm (1/2”) holes separations from 19mm-190mm (3/4”-7.5”).
     

    8. Can be used for universal OHC engines while useful on most Asian overhead cam engines, such as Toyota, Nissan, Audi, Chrysler, Citroen, Dodge, Ford, Fiat, Peugeot, Honda, Mazda, Mitsubishi, Nissan, Renault, Rover (2.0 Diesel), Saab, Seat, Volkswagen, Volvo, Toyota-Camry (3 VZ-FE, 10 MZ-FE), Nissan-Maximas (Va 30 VG Engines).
     

    Package included:


    1pcs Sprocket Holder Holding Tool 



    Payment

    1. Payment methods accepted: Payoneer, Paypal, Credit Car, Debit Card and many other mothods.

    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you     pay,cause it cannot be changed once the order sent out.

    1. Payment methods accepted: Paypal only.
     
    2. All major credit cards are accepted through our secure payment processor Paypal.
     
    3. Payment must be received within 7 business days of auction closing.
     
    4. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order sent out.
    Shipping

    1. Item will be shipped out within 1-2 business day after your payment cleared as we promised.

    2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by ebay message or email if you cannot get your order in time.

    Returns

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 

    Customer Services
    Please contact us via ebay using"Contact member". We will respond within 24 hours or less on weekdays.
     
    We apologize for the late reply during the holidays.Because our office is closed on Sunday and public holidays.So sorry for any inconvenience.

    Shop Category
     Store Home
     New Arrivals!
     Tools
     Car Led Light
     Car Rear View Cameras
     Boats Accessories
     Oil Filter Wrench
     Generator Tools Yamaha Honda
     Brake Pads
     Jeep Wrangler JK JL
     Jeep Compass Renegade Patriot
     Dodge RAM Challenger Charger
     Ford Mustang
     Chevy Camaro
     Blacksmithing Tools
     Other
    Hot Item
    Weekly Deal

    content_src_url

    New Arrival Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Camshaft Diesel Injection Pump Cam Pulley Sprocket Holding Tool for Honda Toyota

     

    Fitment:


    Works on All models with sprocket holes larger than 12mm (1/2") & hole separations from 19mm to 190mm (3/4"-7.5"), such as Audi, Chrysler, Dodge, Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo and so on.

     

    Features:
     

    1. Made of high quality steel for durability and perfect match, hold the camshaft stationary during removal and installation of sprocket retaining nuts and bolts.
     

    2. Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc., also works on diesel injection pump or water pump.
     

    3. Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt.
     

    4. With this tool, no more jamming screw drivers through cogs to hold camshaft sprockets or or camshaft gears in place.
     

    5. Detent grooves on holding pins gives user a sure hold to use as a counter holder when loosening or tightening sprocket retainer bolts.
     

    6. Long handle enables technician to easily hold the pulley when tightening or loosening retaining bolts, all metal design with non-slip rubber grip.
     

    7. All models with sprocket holes larger than 12mm (1/2”) holes separations from 19mm-190mm (3/4”-7.5”).
     

    8. Can be used for universal OHC engines while useful on most Asian overhead cam engines, such as Toyota, Nissan, Audi, Chrysler, Citroen, Dodge, Ford, Fiat, Peugeot, Honda, Mazda, Mitsubishi, Nissan, Renault, Rover (2.0 Diesel), Saab, Seat, Volkswagen, Volvo, Toyota-Camry (3 VZ-FE, 10 MZ-FE), Nissan-Maximas (Va 30 VG Engines).
     

    Package included:


    1pcs Sprocket Holder Holding Tool 



    1. Payment methods accepted: Payoneer, Paypal, Credit Car, Debit Card and many other mothods.

    2. All major credit cards are accepted through our secure payment processor Payoneer.
    3. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you     pay,cause it cannot be changed once the order sent out.

    1. Payment methods accepted: Paypal only.
     
    2. All major credit cards are accepted through our secure payment processor Paypal.
     
    3. Payment must be received within 7 business days of auction closing.
     
    4. We ship items to Your Paypal address.Please make sure your Paypal address is correct before you pay,cause it cannot be changed once the order sent out.

    1. Item will be shipped out within 1-2 business day after your payment cleared as we promised.

    2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by ebay message or email if you cannot get your order in time.

    1. Return to us within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).

    2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.

    3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. 

    Please contact us via ebay using"Contact member". We will respond within 24 hours or less on weekdays.
     
    We apologize for the late reply during the holidays.Because our office is closed on Sunday and public holidays.So sorry for any inconvenience.

    Copyright of annbey-2009. All rights reserved.