Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified ) for Polaris RZR/Ranger/ATV/UTV
Click Thumbnails to Enlarge
Condition: BRAND NEW IN ORIGINAL PACKAGING
Warranty: 1 YEAR AUDIOSAVINGS
Description of RXD-T2:
The RXD-T2 is part of the
Rockville proton series. The RXD-T2 is a 2 channel Amplifier with 2400 watts peak output and 2x600 watts Dyno Certified RMS Power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.
Warning:
This amplifier produces insane power! We do
not want you to blow your speakers. Do not under-estimate this
amplifiers' capability! After purchasing this amplifier; install with
the gain level down all the way and then crank it up very slowly to
protect your speakers or subwoofers from blowing.
The RXD-T2
is rated at 1200w RMS Dyno Certified! This amp performs at
600 x 2 @ 2 ohms RMS and when you bridge it you get 1200 x 1 @ 4
ohms! This is a full range class "D" amplifier. It
is super super efficient.
We will offer
a 90 day money back guarantee. If
you are not happy with the output power or sound quality, we will call
tag the amp back and refund all of your money!
One
of the tricks to determine the real power of a car amplifier is to
multiply the fuse rating by 10 to determine the true RMS power. This
formula almost always works within 20 %. RXD-T2 has (3) 35 Amp fuses.
This amplifier will also go louder than most amps with this same fuse
rating due to how efficiently it runs.
There
is really no amplifier on the market that sounds this good and has
this much output power at this price point.
Features:
- Rockville RXD-T2 2400 Watt Peak 2 Channel Micro Class D Water Resistant Car Amplifier (2 x 600 Watts RMS Dyno-Certified )
- Full-Range Class D Amplifier Architecture
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
- 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
- 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
- 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
- Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
- 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
- Fully marine grade amplifier
- Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
- Double Sided Surface Mount (SMD) PCB Design
- High-Speed MOSFET Power Supply
- Studio-Grade Bipolar Output Stage Transistors
- 2-Ohm Stable Stereo
- 4-Ohm Mono Bridgeable
- Mute and Delay Soft Start System
- Full IC-Controlled Protection Circuitry
- RCA Preamp Line Output
- Status Mode LED Indicator
- 8 Volt Preamp Circuitry
- 4 Gauge Lucite Encapsulated Power/Ground Terminals
- 12 Gauge Lucite Encapsulated Speaker Terminals
- Fully Adjustable 12dB / Octave Crossover
- Low Pass 50Hz - 250Hz
- High Pass 50Hz - 250Hz
- Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
- Minimum THD at Rated Power: < 0.05%
- Frequency Response: 15Hz - 20KHz
- S / N Ratio: 100dB
- S/N Ratio: >97dB
- Damping Factor: > 200 @ 100Hz
- 3 x 35 Amp Fuses
- Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"
About
Rockville Quality Control Procedures:
The
Rockville brand stands for Quality, Innovation and Value. All Rockville
products go through the most rigorous quality control standards in the
industry. Products go through months of extensive testing before they
reach your hands. All user functions are tested and all internal
components are tested for quality. Rockville makes products that are
virtually un-breakable! Rockville is one of the only brands in its class
to test every concept model for weeks or months before starting
production. Once production begins, Rockville sends product engineers to
their factory to quality control every line of production. During
production every product is tested and on top of that Rockville goes the
extra mile and has their high level product engineers do an additional
quality control. They test a certain percentage of all products from the
production line a second time to ensure that the quality meets their
vigorous standards, and to make sure that there is never a batch of
products with even a slight problem. All Rockville DJ/PA speakers are
backed with a full 1 Year warranty, though it is unlikely that you
will need to use it.
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer
satisfaction and therefore offer free return shipping within 30 days of purchase
on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give
you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any
reason within the first 30 days of when it was delivered to you; you have the
following options:
- We will send you a pre-paid shipping label to replace the item for a brand new one.
- We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
- If you are returning a working item in used condition for a refund there will be a
20% used item fee deducted from your refund. All replacements and exchanges are
free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You MUST notify us within 48 hours if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.