Kit Includes

• APC-T575L Actuator Kit (QTY: 1)
• APC Weatherproof Control Box with Built in Battery Compartment (QTY: 1)
• APC Four Button Keyring Remote (QTY: 2)
• APC Four Button Long Distance Remote (QTY: 1)
• 9aH High Capacity Battery (QTY: 2)
• APC Wired Single Push Button Switch with Key Issolation (QTY: 2)
• 5m 2 Core Non Shielded Cable (QTY: 2)
• Gate Sensor | APC Photoelectric Gate Safety Sensor - Safety Beam Infrared Photocell Gate Sensor Detector (QTY: 1)
• 10m 4 Core Non Shielded Cable (QTY: 1)
• 24v 20 Watts Solar Panel (QTY: 1)
• Solar Panel Fence Post & Bracket for APC 20 Watt Solar Panels (QTY: 1)

Product Information

Heavy Duty Slimline Stainless Steel Telescopic Linear Actuator

 

Heavy Duty 24V Motor with powerful and quiet operation comprised of a cast alloy rear housing and a stainless steel piston for the ultimate compact design and neat appearance Easy to use manual override using the supplied butterfly key in a emergency situation. The system can handle light and heavy gates up to 250kg maximum weight or up to 3m maximum length.

Emergency Clutch Override

Easy manual override in case of an emergency using the supplied butterfly key, slot in and turn clockwise to operate the gates manually.

All Metal Gears

Powerful and whisper quiet 24V motor and all metal gears

Actuator Dimensions

Specifications

Installation Geometry

Weatherproof Control Box

The CBSW24 series smart control panel is an easy to connect, simple to setup and feature rich control box vast amount of features as listed below:

 Fully weatherproof with a seal
 Pre Connected Weatherproof Glands for Wiring Connections
 Hinged door with a padlock slot for added security

 

System Features

 Standalone Solar System
 High Capacity Battery System
 Built In Solar Regulator
 Automatic Setup Feature to learn the Ramp Up and Slow Down points of the gates
 Automatic Feature Learning will learn all features of the remote with a simple pairing process
 Ultra High Security Rolling Code remote system allows for the highest form of security for entry to your property
 Adjustable Automatic Close time up to 3 minutes
 

Safety Features

 Adjustable Over current adjustments
 Safety Sensor connection input
 Automatic Courtesy Light Output

 

Special Features

 Party mode: The automatic closing can be cancelled using button 3 on the remote control buttons when expecting a visitor to arrive, reversing a trailer and numerous other uses.
 Service Gate Function (12V 250mA max.). Using the second lock output will allow the user to power and control a second electric striker installed on a pedestrian access gate the second lock is powered from the control panel and controlled using button 4 on the remote. APC Wired and wireless Accessories can also be use to control the Lock 2 function.

Accessories Compatibility

 Constant 24V DC Accessories Output
 Switched 24V DC Output for closing direction (used for safety devices to conserve power, powered on when required)
 Open/Stop/Close Inputs for Gate Operation
 Smart Opening & Closing LED indicators: Green LED on during opening and Red LED on during the closing
 Automatic Electric Lock Output

Controlling Options

Any or all of the following may be connected to operate the gate

 Remote controls
 Entry and Exit push button with isolation key switches (Wired and Wireless Options Available)
 Keypads (Wired and Wireless Options Available)
 Exit/entry sensors
 Intercom system with dry contact output
 Automatic switching timer
 WiFi Control System (App Based Control)
 GSM Control Systems (Mobile Call/SMS based Control)

24V 20 Watt Solar Panel (Upgradable to 20 Watt or 60 Watt options)

Mono Crystalline silicon solar cells with 3mm tempered glass and two sheets of tedlar-polyeaster-tedlar (TPT) and ethylene Vinyl acetate (EVA). This protects against moisture penetrating into the module. The solar panel is supplied with a fence mounting bracket system along with a pre-connected 5 metre cable (maximum cable distance is 20 metres), the solar panel is also fitted with a diode to prevent feed back from the batteries.

24V 9aH Battery System

 

Supplied with the automation kit the 24V 9aH battery system will allow for continued use of the gate system wether in day or night. The system can operate for up to one week of regular residential use without any charge from the solar panel (winter months/wet season) and will automatically recharge from sun light. When the system batteries are fully charged it will continue to float charge to keep the batteries topped up ready for use. In a case of extended use requirments or higher duty there are upgrade options to 17aH and 33aH battery systems.

Remote Features

Specifications

Long Distance Remote

The APC-RC450S Long range remote is capable of achieving operating distances of up to 400 metres, coupled with the add on booster antenna it can reach up to 800 metres. With these distances you can operate the gate system from around the property, at the home or from the workshop. Multiple long range remotes can be used on the one system.

APC-PE2000 Photoelectric Safety Sensor Set

The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.

If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position.

Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box.
 

• Up to 15 Metres Infared beam operating distance


• Only powers on when the command is given to close the gates


• Alignment led to assist in the installation process


• Weather sealed with the supplied cover seals


• Easy screw down wiring termination


 

Wired Push Button with Isolation Key

The wired push button switch is a simple and easy to use method to operate the gate. It is mounted in the general area of the gate and can be isolated by using the supplied keys without affecting the rest of the system, this is handy if you want to continue using the remotes or any other method of operation but wish to stop use of the push button itself.

The push button is wired to the control board using the supplied cable roll. If required the wired push button can be upgraded to a wireless version thus eliminating any need for wiring.