Applicable User&Skills:
1. Advertising&Design staff
2. PCB Engineer
3. Woodwork fans
4. Model fans
5. User should better have electronics background
6. DIY ability to repair
Highlights of water cooling system :
It can cool the spindle and protect the machine
Avoid the spindle burn out
Can engrave the high hardness or metal
It can improve the efficiency and accuracy of the machine.
X,Y,Z Working Area:600(Y)*390(X)*120(Z)mm
Outside dimension:865*680*570mm(L*W*H)
Table size:770(Y)*490(X)mm
Lathe structure:6061/6063 Aluminium alloy
Max. Feeding height:≤100mm
Drive unit:
X axis:1605 Ball Screws
Y axis:1605 Ball Screws
Z axis:1204 Ball Screws
Sliding unit:
X axis:High intensity Chromeplate shaft
Y axis:High intensity Chromeplate shaft
Z axis:High intensity Chromeplate shaft
Stepping motor:57 two-phase 3A 150N.cm
Spindle motor
(tips:1,The spindle motor must connect with the VFD.
2,It cannot directly connect with the supply voltage (AC110V).
3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.
Outside dimension:65*158mm
Material:304 stainless steel,Copper coil,Pressure cast aluminum pipe water jacket
VOLTS,current,power:AC220 /50Hz,5A,1.5KW VFD
Spindle speed:24000 rpm
Max working frequency:400Hz
Principal axis collet:ER11collet,Standard configuration :6mm
Nut Model:ER11-A
Cooling:Water-cooling
Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM
Lubrication way:lubricated by high grease
Repeat accuracy:0.05mm
Spindle precision:radial beat acuities 0.03mm
Carving Instructions:G code / TAB files / nc file / NCC files
Communication interface:through parallel connection with computer
Software environment:windows XP / win7
Maximum Idle speed:1500mm/min
Working Speed :50-1500mm / min (different material with different speed settings)
Control box parameters:
How to USE
1.Assembling and locating the CNC machine on steady desk well.
2.Make sure that your computer has a USB port output.
3. Place the contral box in a ventilated dry place where there is no dust,no moisture
4.Connecting the control box with the CNC machine and you computer and make sure