This A/C compressor is fit for BMW Models 2006-2013 . Each product is tested strictly.
Specifications
COMPRESOR TYPE: Piston
Discharge Port (mm): 15
Grooves : 6
Pulley Diameter (mm): 110
Suction Port (mm): 28
Package Content
1 x A/C Compressor
Fitment:
2006-2007 BMW 325i 2.5L)
2006-2006 BMW 325i 3.0L)
2006-2006 BMW 325xi 3.0L)
2007-2007 BMW 328i 3.0L)
2007-2007 BMW 328xi 3.0LTo 03/01/2007;)
2006-2007 BMW 330i 3.0L)
2006-2006 BMW 330xi 3.0L)
2007-2008 BMW Alpina B7 4.4Lwith 7SEU16C Compressor;)
2008-2013 BMW M3 4.0Lwith 7SEU16C Compressor;)
2006-2010 BMW M5 5.0Lwith 7SEU16C Compressor;)
2006-2010 BMW M6 5.0Lwith 7SEU16C Compressor;)
2009-2010 BMW Z4 3.0Lwith 7SEU16C Compressor;)
OEM and Competitor Interchange:
Austin Baker: 10363031
Autocomp Technologies: 1011049
Autocomp Technologies: 104711532
Autocomp Technologies: 1111049
Autocomp Technologies: 114711532
Autocomp Technologies: 1211049
Autocomp Technologies: 1211255
Autocomp Technologies: 124711532
BMW: 64522151495
BMW: 64526918753
BMW: 64526925721
BMW: 64526956716
Denso Automotive Systems: 4710483
Denso Automotive Systems: 4710532
Denso Automotive Systems: 4711532
Four Seasons: 97391
Four Seasons: 98391
Omega: 2021736R
Omega: 2021871AM
Ranshu: 140350
Ranshu: 140350NEW
Trad Automotive: C1614R
Trad Automotive: C1960
Trad Automotive: C1960R
Trad Automotive: C2032
Trad Automotive: C2032R
UAC: CO 11049C
COMPRESSOR INSTALLATION INSTRUCTIONS
Please read these instructions prior to any repairs on your vehicle.
Follow all federal, state, and local regulations when repairing an automotive A/C system.
Take appropriate safety precautions –
1. Wear eye protection (safety glasses).
2. Do not smoke next to the vehicle when performing repairs.
3. Work in a well-ventilated area.
4. Wear skin protection (such as gloves and closed toe shoes).
5. Recover refrigerant before making repairs.
REMOVING THE OLD COMPRESSOR
1. Open the hood of the vehicle and locate the A/C Compressor.
2. Remove the A/C belt from the A/C Compressor pulley. This may involve loosening the belt tensioner (if it is equipped).
3. Evacuate the A/C system using a refrigerant recovery machine.
4. Disconnect the negative battery cable.
5. Remove the bolt that secures refrigerant lines to the A/C Compressor. Then, inspect the A/C lines for any contamination such as metal or excessive dirt inside them. If any contamination is found, the system will need to be cleaned.
6. Disconnect any electrical connectors from the A/C Compressor.
7. Remove the AC Connections. Remove the A/C Compressor mounting bolts.
8. Remove the A/C Compressor from the vehicle.
INSTALLING THE NEW or REMANUFACTURED A/C COMPRESSOR
1. Once the old compressor has been removed, begin by removing the receiver/drier or accumulator, and the expansion valve or orifice tube from the vehicle.
2. Next, flush the condenser and evaporator using a non-oil based A/C flush. The valve must be removed on expansion valve system before the evaporator can be flushed.
Flush evaporators from inlet to outlet.
Flush condensers from outlet to inlet.
NOTE: Condensers produced from 1990 – present are extremely difficult to clean. As a result, if the compressor had a major failure, it is recommended that the condenser be replaced.
3. This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
4. Install the new receiver drier or accumulator, and new expansion valve or orifice tube.
5. Next, install the new or remanufactured A/C Compressor.
6. Install and tighten the A/C Compressor mounting bolts.
7. Reconnect any electrical connectors to the A/C Compressor.
8. Re-install the refrigerant lines and A/C belt to the A/C Compressor.
9. Reconnect the negative battery cable.
10. Evacuate the A/C system with an A/C servicing machine for at least one hour.
11. Check the system for leaks.
12. If there are no leaks, install the refrigerant charge (Check the A/C system sticker under the hood of the vehicle for the proper amount and type of refrigerant for the system). Then, let the system set for 2 minutes. Doing so will allow the refrigerant to carry the oil and spread more evenly throughout the system.
13. Start the vehicle’s engine and turn on the A/C system.
Make sure the windows and doors of the vehicle are open.
Should you have any questions regarding the installation of your new or remanufactured compressor, please do not hesitate to contact us.
Frequently Asked Questions
Q. Does the compressor come with oil?
A. Yes! This compressor comes pre-filled with the correct amount of oil. Thus, there is no need to add any additional oil to your system.
Q. Does the compressor come with the clutch and pulley?
A. Yes, all of our compressors come complete with the clutch and pulley unless otherwise advertised.
Q. How long does shipping take?
A. Shipping usually takes anywhere from 1 to 5 business days. The amount of time it takes for the compressor to reach your destination depends on your location.
Q. Do you accept returns?
A. Yes, we accept returns within 14 days of purchase on all unused items. Any product you return must be in the same condition you received it and in the original packaging. A return authorization number (RMA #) is required from A/C Compressors prior to returning any merchandise. Your request to return these parts must be received by us within 14 days from the date of purchase. The purchaser is responsible for shipping charges to return all parts. Returned items that are found to have been installed, dirty, tampered with, locked up, or physically damaged will not be refundable.
Q. What is the return shipping address?
Online Seller RMA , 41 logistics Blvd, Suite A-2 #44364006 , Walton Kentucky 41094 US
NOTE: In order to determine if you are purchasing the correct part, please provide us with the year, make, model, and engine size of your vehicle. Failure to do so will result in the purchaser being responsible for any and all fees associated with returning the item for a refund. If the purchaser does not send us the year, make, model, and engine size and the purchaser receives a compressor which does not fit the purchaser's vehicle, the purchaser will be responsible for the shipping costs for the correct compressor, should the purchaser decide to purchase it.
