>>> XTOOL X100 PAD3 All System Diagnostic Scanner & Professional Key Pro/gramming Tool with KC100 Key Pro/grammer + EEPROM Adapter

XTOOL X100 PAD3 is a professional automotive key pro/gramming scan tool that combines pro-level IMMO & Key pro/gramming, OE level all systems diagnostics, comprehensive service options and powerful hardware to perform almost all functions that a professional auto technician, mechanics, dealership, used car dealer, would ever need for daily vehicle repair and maintenance.Better than X100 PAD/X100 PAD2/PRO, Cover more cars for key Pro/grammer. That is the best device for repair shop and locksmith !

>>> Huge Update!

Advanced E.C U Cod-ing: Online & Offline E.C. U. coding, match the components, enhance the vehicle performance, fits for V-W/AUDI/SKODA.  

New added Programmable Module Installation(PMI) function: When you replace or initialize a new/used module for Ford/Lincoln/Mazda, XTOOL X100 PAD3 allows you to copy the data from the original module and install it to the new unit to finish the module replacement.

Increase 31+Service to 38+ Services + Adaptation+ Calibration+ Initialization: Oil Reset, ABS Bleeding, Injector Coding, Fuel Trim Learn, Transmisson Reset, Language Change, A/F Settings, Stop/Start Reset, SAS Reset, TPMS Reset, Reset, BMS Reset, Window Initialization, Power Balance, VGT Learn, Seat Calibration , etc.

>>> What is the different between X100 PAD3 /XTOOL D8 D9 Diagnostic Scanner?

NOTE:  X100 PAD3 support pull pin codes For Dodge Ram 2013-2022 .

NOTE: X100 PAD3 support pull pin codes For Dodge Charger/Challenger/300C 2015-2022 .

NOTE: X100 PAD3 support read pin codes from OBD for FCA Group( For Fiat/ For Chrysler/ For Dodge/ For Jeep ), via VPW protocol.

X100 PAD3 support more vehicle pro/gram a key.

X100 PAD3 include KC100 key pro/grammer & EEPROM Adapter, which can support more powerful functions, for example Read PIN, Add_New_Key, Remote Learning, Read/Write/Backup/Restore IMMO Data, Key Pro/gramming for BMW CAS4/3/2/1 IMMO, for VW Group 4th/5th IMMO and etc.

>>> Professional IMMO & Key Pro/gramming

XTOOL X100 PAD3 is a professional car key pro/gramming tool that can perform pro-level key pro/gramming and IMMO functions as below:

1. Read PIN
2. Add Transponder/Smart Key/Remote Learning, Disable Lo_st~Keys, Make Dealer Key
3. Key Learning for BMW CAS4/3/2/1
4. Key pro/gramming for VW, for Audi, for Skoda, for Seat, for Bentley, for 4th,5th, MQB IMMO
5. Make Dealer~Key for Toyota & for Lexus (with KS-1 key programmer)
6. Make Dealer~Key for Mitsubishi(with KS-2 key programmer)
7. IMMO Car Mo Reset/Coding
8. IMMO Data Backup/Restore
9. Read & Write Key Chips
10. Read & Write Mercedes Infrared Keys(Need Add KC501)
11. Read & Write EEPROM
12. Detect Remote Frequency

Comes with KC100 Function:
1. Support the MQB key matching for V-W/A-udi/S-koda 4th, 5th
2. Support the key matching for BMW CAS1-CAS4
3. Support the smart key pro/gramming function for 2015-2018 Land Rover
4. Support key pro/gramming for Fiat 500, Palio and other models
5. Work with KS-1 S!mulation Card (Package NOT Included) to support the ALL-KEY-LOST function (94, 98, 88, A8, A9, 39 S!mulation key generation) for Toyota / Lexus / Scion

Comes with EEPROM Adapter Function: 1. Pin Code Reading  2. Initializing  3. Chip pro-gramming

Note: Please come to us with brand / model / production year / VIN number of your car to check compatibility before purchase. This function is not universal.

>>> Compatible with KC-501, KS-1, M822, M821 Key Pro/grammers & XV100 Inspection Camera (Thess accessories do not include, additional purchase required )

XTOOL X100 PAD3 comes standard with KC-100 key pro/grammer. However, you may choose to get KC-501, KS-1, M822,M821  key pro/grammers to extent its capabilities to the next level.

It also works with XV100 digital inspection camera to perform physical inspections on hard-to-reach spots like engine cylinder, and etc.

With KC501 can programmer key for BMW/V-W/BENZ(NO for all)

With M821 can programmer some B-ENZ key all lost

With M822 For Toyota 8A Key All Lost  

With KS-1 For Toyota/Lexus all key lost and dismantled

Noted: KC501/KS-1/M822/M821/XV100 Need to buy sperately

>>> Advanced Vehicle to Disable Annoying Car Settings & Enhance Vehicle Performance

XTOOL X100 PAD3 Vehicle Module coding scan tool comes with advanced Vehicle Module Coding capabilities to reprogram the adaptive data for certain components after replacement to enhance vehicle performance and flash hidden functions to customize car settings and disable annoying functions. NOTE: Vehicle Module Coding or Flash Hidden Functions do NOT work on all cars. Please check compatibility before purchase.

Vehicle Module Coding & Online Coding & Guided Functions

>> Online Coding for V-W, Audi, Skoda Only
>> Online Calibration
>> Online Parameterization
>> Components Matching
>> Guided Functions for V.A.G vehicles

Flash Hidden Functions & Disable Annoying Car Settings

NOTE: E/C U Coding works for specific V W, Audi, Skoda vehicles only. Flash Hidden Functions work on specific vehicles. Please check compatibility with VIN # prior to purchase.

NOTE: XTOOL  X100 PAD3 can NOT program E.C Us or reflash modules like ECM, PCM, BCM and etc.

>>> OE Level All Systems Diagnostics Scanner + Bi-Directional Control(Active test)

X100 PAD3 bi-directional scan tool comes with OE level all systems diagnostic capabilities that you can only find in dealer-tool previously. It can scan all available systems to perform diagnostics including:

>> Pull Codes: including manufacturer-specific codes, pending codes, permanent codes
>> Clear Codes: Clear codes, reset monitors and turn off warning lights
>> Live Data: Live data stream from various sensors including misfire, engine rpm, transmission fluid temperature and etc.
>> Freeze Frame: Retrieve parameters when DTC is recorded for better diagnostics.
>> Car Mo Information: Check Car Mo version and etc.

Bi-Directional Control(Actuation Test）– Precisely Locate Car Problems

In order to provide professional mechanics a real flagship scanner,  PAD3 is equipped with advanced bi-directional(active test) which could only for expensive auto scanners.

Featuring bi-directional control, this intelligent diagnostic tool – X100 PAD3 , can output the commands to Vehicle Modules, read the Vehicle Module data and monitor the operation of the actuators. Through active tests, also called actuator tests, this bi-directional diagnostic scanner can precisely locate the car problems, letting you quickly know whether a specific system, component, or subsystem is functioning properly or not.

For example, If a fuel pump is not working and leads to ignition failure, it could be a faulty pump, wiring, relay, or command. By turning the fuel pump on and off via the PAD3 scanner, you can quickly determine whether it’s a wiring, relay, or pump issue without removing any parts.
Here are some other examples of active tests, which help you locate faults in the shortest time, saving time on troubleshooting:

>> Cycle the a/c clutch on and off;
>> Switch the interior lights on and off;
>> Perform an evaporative emissions leak test;
>> Active tests for inside mirrors, exterior mirrors (high version only), adaptive headlamp, steering wheel heating, windows, wash/wipe system, horn, reset starter lock, etc.

Note: Please come to us with VIN number to check compatibility before purchase.

>>> XTOOL Auto Diagnostic Scanner Supports More than 38+ Service Functions

1. Oil Reset: Reset service intervals after oil change and turn off the oil light.

2. EPB Reset: Reset brake pads after replacement of brake system.

3. SAS Adjustment: Perform calibration of the steering angle sensor

4. BMS Reset: Register the new battery to the ECU after replacement.

5. Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

6. ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

7. Injector Coding: Coding injectors after replacement.

8. Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

9. IMMO: Disable the lost vehicle keys and program a new replacement key fob.

10. Windows Initialization: Initialize the car window when the vehicle window fails or after replacing the window glass.

11. VGT Learn: Activate the electronic water pump before venting the cooling system.

12. Airbag Repair: Allows you resets the airbag data to clear the airbag collision/crash data.

More special functions includes DPF, TPMS Reset, Instrument Cluster, Suspension, A/C Relearn, Seat Calibration, Headlight, Transporte Mode, Tire Upgrade, Gear Learning, Power Balance, EEPROM, Electronic Pump Activation, HV Battery, EGR Relearn, E/CU Configuration, Speed Limit, Clutch Adaption, FRM Reset, Write VIN, Control Unit Reset, Odometer Read, A/F Setting, Start/Stop, Language Settings, SRS.

Note: Please checck compatibility before order! Not for all vehicle.

>>> Premium Hardware + Compatibility Check

As an advanced auto key pro/gramming tool, X100 PAD3 comes with advanced hardware configurations as below that enables you to enjoy robust and smooth performance:

>> Android 5.1.1 OS
>> 8INCH 1024*768 high resolution display
>> 1.8GHz Quad-Core Processor
>> 10,000mAh lasts for 10 hours of use
>> 2GB RAM, 64GB ROM
>> 8MP Camera
>> Built-In Speaker, Microphone
>> 2.4GHz & 5GHz Dual Frequency Wi-Fi
Note: If Wi-Fi fails to connect, switch the router settings from WAP3 to WPA2.

>>> 2 Years Software Updates/Lifetime Tech Support

X100 PAD3 comes with convenient one-click Wi-Fi software updates to fix software glitches, add new vehicle coverage, new features and improved performance within its fold of 2(Two) Years. While in issues, pls contact us via ebay message, professional technicians will provide you with lifetime technical support.

>>> 90+ Brands Coverage

XTOOL X100 PAD3 works on 90+ auto makers globally including American, European, Asian vehicle makes and models, including sedans, light duty trucks, SUVs and mini van to perform diagnostics.For service functions or pro/gramming car keys, please come to us with vehicle make, model, year, VIN #, key type, and clarify whether it’s add new key or all lost situation before purchase.

>>> Data Loggings, Report, Multi-Lingual Menu

XTOOL X100 PAD3 allows users to create and upload data loggings to XTOOL server for analysis when issue occurs. And you may choose to generate diagnostic report for each diagnostic or service sessions. This scan tool comes with 14 menu language options. Please come to us with the Serial Number to get update authorization to change menu language.