WHEN YOU BUY,  MUST MESSAGE ME STATING WHICH TYPE (1-4) YOU REQUIRE

Most of these are £60 a pair + delivery from the hardtop suppliers!

This ad is for 1 pair.

Most hardtops use gas struts with 10mm ball mounts on each end, screwed onto a 4mm diameter thread each end of the gas strut.  This ad is for that type.

If your existing gas struts have a ball mount 1 end & a different bracket the other end, these will not fit.  Usually on these hardtops: Truckman Luxury range, ASX, Flake, Carryboy, some EKO & Avenger. The diameter of the threads on this type of strut are 8mm, not 4mm.  You will need to see my other Ebay ad for this type.

Please do not message me with any part or serial number on your gas strut.  This means nothing. It is just the length & the type of ends that are important.  These are all the correct strength for a glass door.

 Just measure the length of your existing gas strut, between the centres of the round fitting holes when full extended.  Most are approximately 40cm (such as Snugtop XTR & Supersport, Alpha, Avenger & most others).  Some are 30cm (such as the Snugtop Cab-Hi).  It doesn’t matter if there is a 2-3cm difference, it just means the door will open very slightly more or less.

I sell these different types. 

MAKE SURE YOU SEND ME A MESSAGE STATING WHICH YOU REQUIRE, AS THEY ARE DIFFERENT STRENGTHS AND LENGTHS.

1.    300mm for a hardtop glass door

2.    350mm for a hardtop glass door

3.     400mm for a hardtop glass door

4.    450mm for a hardtop glass door

 These come with easy fit clips.  Not the normal type that can ping off & get lost when you try to release them!

The male ball mounts shown separate in the photo are not included, as you will not need them.  But if you want any, you can have them free.  Just message me saying how many you need when you order.